hi scruffy        the lanc i am building is the early plan with the one piece wing,so the nacelles and cowls are made of balsa and lite ply (pain in the arse to do)i am using 4 keda kd2217-20t 22A 860kv (220w) motors on 8inch 3 bladed props.(i have one of these motors on a 3d thing that goes mental!! so i know they are good) 11 quid each.the esc are total overkill at 60A but are opto and only 11 quid they are mounted just behind the motors in each nacelle.esc s are all y-leaded together and all motors start all together and run up nice.(nearly pulls the wing out of your hand)each motor runs off a 3cell 2250mah lipoly.yesterday started sprayin the fus,next week may get a bit more done but my leg is now ok and work are starting ring me up about going back.i shall try and do some photos for you sometime cheers    bill

Thanks for the info Bill, where did you get the motors from the cheapest i can find are over £15  each

scruffy     the motors and esc,s were from the big fish(aka giantcod .co.uk)they have gone up a bit they were under a tenner a couple of months ago but are now 11quid!!! hope this is of any help to you    bill