By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for WolstonFlyer

Here is a list of all the postings WolstonFlyer has made in our forums. Click on a thread name to jump to the thread.

Thread: Alternative to Spektrum
17/06/2017 22:26:46

Get a Frsky then you can get / make a Spektrum module to put in the back, that's what I have done and then you can fly all of your models from one TX

Thread: Phoenix 2000
17/06/2017 09:48:32

Apparently CML distribution are a UK importer for EXHobby so you might be able to ask them about spare parts??

Edited By WolstonFlyer on 17/06/2017 09:50:27

17/06/2017 09:45:47

Haha, true. Things change rapidly in China

17/06/2017 09:18:17

It is made by a company in China called VolantexRC Ltd, who were previously called Lanyu RC.

Thread: Fedex tracking
23/05/2017 19:21:16

Are you trying the number here?




Edited By WolstonFlyer on 23/05/2017 19:28:11

Thread: Chris's Bella Ballerina HD
13/05/2017 18:27:23

Wow, very nice Chris. So who are you going to trust for the test flight?i

Edited By WolstonFlyer on 13/05/2017 18:27:52

Thread: Cardboard clone of a Funjet / Radjet
25/03/2017 10:33:30

I like it, I hope it flies well for you. yes

Thread: The thread for your subscriber questions and queries **please do not start a new thread**
25/03/2017 10:20:23

I agree with Pete, every magazine subscription I have ever had starts with the next months issue after you subscribe, they don't post out a single copy of the current month to the new subscriber, they add you on the distribution list for the next issue and bulk postage drop. This website says the next issue is out on 14/4/17 so I would expect you to receive that one as the first issue on a new subscription.

Edited By WolstonFlyer on 25/03/2017 10:24:51

Thread: BMFA NAtional Centre website launched
20/03/2017 16:54:29

I could cry, I am moving away from the area next week from Coventry to South Somerset crying

Thread: Chris's Bella Ballerina HD
01/03/2017 09:26:24

My build has been stopped for a while Chris, I am in the middle (well closer to the end) of selling and moving house, it's a big move with 3 children and lots of 'stuff' to move to the other end of the country.

After moving I will have my very own garage or 'La Grotte' , it needs a bit of work ( a new roof and doors) so once that is done and I have insulated it etc I can have my own workshop for building things

Happy birthday for Today cakecakegift

27/02/2017 19:09:18

Hi Chris, for testing servos one at a time ( as normally done with a servo tester) yes a small 5V 1.5A DC supply will work fine, just get the polarity correct. Alternatively use a low cost 4.8V to 6V receiver pack or 4x AA battery holder with servo plug attached.

I personally use an old 4x AA NiMh rechargeable pack (4.8V) for doing servo testing and powering up receivers etc,





Thread: Spektrum module for Taranis
03/02/2017 17:17:02

Ah, you went for the extra LED, very nice I didn't bother on mine.

03/02/2017 09:00:27

Just a note to say the remaining kit of parts for the circuit has sold.

29/01/2017 22:47:11

I have one remaining full set of parts to make up a Spektrum module, you will need the RF board from a DX5e and a suitable case such as the DM9 available from here **LINK**

I can post the kit inside the UK for £15 , I can't go lower than that because of the cost of the PCB from the USA, the postage was expensive.

The kit includes PCB and components to solder on as shown in this picture:



After you have soldered it together, the only tricky bit is the 12 pin socket for the RF board where the pins are quite close together, but it's not too hard.



Shown here with the RF module plugged in to the socket.


Edited By WolstonFlyer on 29/01/2017 22:55:53

Thread: Diesel Crackdown
29/01/2017 20:11:14

Disabled Parking Bays on private property have NO standing in law, so it depends where they say you were parked, if they cannot provide evidence of the alleged parking then I would ignore them, unless this is a ticket issued by the council it is a 'parking charge' and not a fine. I am not a legal expert but know lots of people that have ignored the tickets and nothing has happened after they received 3 nasty threatening letters.

28/01/2017 19:36:11

I am sure the hydrogen fuel cell will never happen.

28/01/2017 19:18:50

I have an older (08 Reg) Diesel VW Sharan automatic at the moment, no DPF.

When I eventually get rid of it I will be going to petrol or possibly electric if Tesla keep making improvements.

Thread: Christmas wishes
31/12/2016 17:05:33

Happy new year - I am off to cook dinner and get slightly tipsy.

Thread: Amazon flying warehouses
31/12/2016 17:00:33

Just imagine something like this hovering over a city and having a technical problem - what a bonkers idea

Thread: Chris's Bella Ballerina HD
31/12/2016 16:45:02

No not made any progress recently, I am flat out with work, 3 kids and trying to sell my house at the moment. I did join the wings together and build the wing tips, I have to do the sheeting next.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Email News - Join our newsletter

Love Model Aircraft? Sign up to our emails for the latest news and special offers!

Support Our Partners
Wings & Wheels 2018
Gliders Distribution
Expo Tools 14 July
electricwingman 2017
Airtek Hobbies
Advertise With Us
Latest "For Sale" Ads
How has your building graduated?
Q: Did you start with ARTF and move to building from kits or vice versa?

 Started with ARTF moved to building from kits only
 Started with ARTF moved to building from plans only
 Started with ARTF moved to building from kits and building from plans
 Started with building kits or from plans and moved to ARTF
 I only build from kits or plans
 I only build ARTF
 I only build from kits
 I only build from plans
 Other (Please specify in thread)

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us