ACC Hobby Space Walker Build

Hi Chris . thank you for the feedback back and photos, I will add a couple of photos now I have some sections built. My model came as deal as it was the last one in stock and no cowl available for months? . I found the same on the motor mount but saw the error as I was unable to see any details on motor fitting inside or outside the mount I went my own way after measure three times cut once. Good news about it's flying capability

So 12 Parts in total to make a rudder ( 4 horizontal stabs missing )

8 parts to make a vertical stabiliser

16 parts for the Horizontal stabiliser and elevators

Edited By RC Plane Flyer on 05/03/2018 16:15:17

Edited By RC Plane Flyer on 05/03/2018 16:17:02

Fusalage Umpteen parts and still some more to add

My option of fitting a motor mount

Dears,

When I found this forum my plane was built, so I don´t have the construction pictures. I´ve tried to fly last weekend, but the wind didn´t give me a break. At nightfalls i take-off and land in a short flight. I´d recommend a quite accuracy CG, and less ailerons controls. If possible, including some flaps during construction would be perfect. Also I changed the landing gear that cames wiht this kit, I´m using a 6" PVC tube formed with hot water. To accomodate the 4 holes in the landing gear I made a base in the wing. Also, the ailerons servos can be mouted inside the wing if you try to adapt some doors.

Edited By Guilherme Pimenta on 06/03/2018 00:45:28

Hi RC Flyer, You have done a very good job. Your kit looks very similar to the Hobby King kit I started , Good luck withe maiden flight Bob

Hi RC Flyer - the work so far is looking good - hopefully there are not to many other items missing from your kit. I found there were some spare parts and plenty of scrap wood so hopefully you can bodger up the parts your need. Keep us posted on how you go.

Guilherme - this looks like a nice finish - did you cover the cowl or paint it? Nice work on the colour scheme - it must have taken some effort.

I see that HK now have a larger 1500mm version so hopefully that has most of these issues sorted out.

Chris

Bit more build with covering started ( My LMS No Red covering ) Motor and undercarriage my preference

Sorry for focus

Hello previous contacts here is my latest photo & update on the Space Walker build.

Maiden flight done on Saturday I think i will have to down rate prop as it was lively on the ground in long grass.

Great glide in, CG spot on, now I will have to source/find/make a cowl

Nice colour scheme - enjoy