Welcome to RCM&E video. This is where you'll find videos made by the team in the course of our travels. Videos that support magazine feature articles, review models, the shows we attended and so on.
We'll be adding videos regularly so remember to check back to see what's new.
VMAR Fieseler Storch - We fly the model that's reviewed in our June 2008 issue.
Horizon Hobby UK press and trade day - A little footage of the flying demo's featuring some of the new models from the company appearing in 2008.
Mig-25 and Lightning - Tony Nijhuis flies his two new models - the free plans in our May 2008 issue. You'll have to make allowances as it was probably a little too windy on the day so our thanks go to Tony for braving the airframes!
Cularis - we fly the motor glider from Multiplex (see our full review in the April 2008 issue) The short on-board sequence is from a FlyCamOne v2.
Nuremburg 2008 - Video footage from the huge trade show in Germany. Held every February, this is where the R/C industry meets to showcase the new models and accessories that we will see in 2008. See our full photo report in the April 2008 issue of RCM&E. Extra photo reports are also here at modelflying.co.uk.
Alex Whittaker discusses and explains the workings of his budget ARC Euro C1 Micro lathe. This video accompanies his beginners lathe series starting in the March 2008 issue of RCM&E. Why not see what a lathe can do for the R/C flyer!
Maniac - Alex Whittaker introduces the March 2008 issue free plan model Maniac and watches it being put through its paces by designer and builder David Royds (Foamy Dave).
Here's the footage from the on-board video camera attached to the Fun Jet that we flew in the video below. The low winter sun got in the way so we're hoping for better things from the camera later in the year.
FunJet - our first video! David Ashby talks to RCM&E reviewer Steve Sales about the Multiplex Fun Jet and we watch the model in action. This model has a 'hot' set-up from Puffin Models and the high speed capability is very apparent! You can see Steve's FlyCamOne video footage above.