In response to many requests, the people at RCM&E's plans service have produced a set of CNC/laser parts for Tim Hooper's version of the classic Keil Kraft model.

Builders will be pleased to learn that a new CNC/Laser-cut parts set speeds up the build process by reproducing the ribs, formers and other items (apart from strip balsa) required while a wood completion pack that includes the strip and sheet is also available.

Why not check out Tim's illustrated Pix-E build blog on the forum?

Datafile
Wingspan:   42"
Wing area:   232 sq. in.
All-up weight:   13.5oz
Wing loading:   8.5oz / sq. ft.
Functions:   elevator, rudder, throttle
Power system:   2408-21 size outrunner, 15-amp ESC, 2S 1300mAh Li-Po battery, 9x6 prop.