on sale 12th April 2019
on the cover
With the show season on the cusp of kicking in, this, we thought, might be a good time to remind you of how show-going can enhance the hobby, a fact that the editor highlights in his photo report of last year's wonderfully diverse and colourful Woodspring Wings event. One of the many highlights was the aerobatic artistry displayed by flying buddies from the combined Az Aerosports and Renegade teams, of which this 107” Pilot Extra 300LX was a part. With Aaron (Azza) Stephens on the sticks you'll struggle to find a better model and pilot combo (page 12 – 18). Photo: Graham Ashby
In days of old R/C autogyros had a habit of being a bit hit ‘n’ miss. Fortunately, thanks in no small part to Richard Harris and his numerous successful single rotor designs, times have changed. Stand by for another whirly winner from Mr Gyronut himself
Ken Willard's design helped pave the way for today's 225mph modern pylon racers, and with a decent aerobatic performance to boot – Shaun Garrity banks and yanks... Sedately!
As Turbine Solutions takes on Wren Power Systems, we chat to Paul Hardman about his plans to merge operations and develop the range
Kits, blingy bits, gadgets and gimmicks. More brand-new tempters that just might take your fancy
Readers’ letters. Have your say in RCM&E's gentlemanly equivalent of Speakers’ Corner
With spring just about here, early-season events are appearing on the calendar at last. This, then, is the perfect time to plan your haymaking, for when the sun shines
Shift those unwanted airframes and splash out on a few new ones, you're worth it
FREE plans for a nifty vintage autogyro and a charismatic STOL, reviews of the Seagull Bearcat and FlightLine 1/8-scale F4U Corsair, plus jets, soaring, sport stuf f, all your favourite columns and heaps more
Sporting a veneered foam wing, sheet tail surfaces and a glass fibre fuselage, Sunshine Modell's classically-styled aerobat would definitely have been labelled a quick-build kit back in the day. Not so now! Marco Penk takes the plunge and discovers an easy assembly and a remarkably well-mannered model
So, just how long have you been ‘making do’ witht hat tatty collection of tired old hand drills, blunt bits and clapped-out clamps? Far too long we suspect! Well, perhaps it's time to tidy up your act? Mike Freeman suggests a tool that could comfortably kill two birds with one stone, and might even get another on the rebound
BEST IN THE WEST
For those who couldn't make it last year Graham Ashby of fers a photographic flavour of the 2018 Woodspring Wings bash and a timely reminder to make a note in your diary
Oozing ‘30s charm yet possessing all the purposeful, workmanlike qualities of an aeroplane with an agenda, the Bu 131 is an understandably popular subject among modellers. Alex Whittaker catches up with a corker
FLY THE TRIANGLE
John Greenfield introduces a new thermal soaring class that's eminently accessible to almost anyone with a 3.5m span motor glider
KNOW YOUR RADIO
Flaperon and Snap-Flap; we've all heard about them what do they really do for us and when should we use them? Andy Ellison sheds some light
Flaperon and snap-flap; we've all heard about them but what do they really do for us and when should we use them?
WATT A DAY
Of f-beat aerodynes, of f-the-wall own designs and the merciless killing of an innocent Fokker. Alex Whittaker braves a blizzard to fly at the famed Rochdale Indoor Meet
The first flight of any model aeroplane is a slightly nail-biting occasion which, without due care and attention, can – and does – end in tears. With a measured approach, suggests Andy Sephton, it needn't be that way
The Bellota Jet Meet (Spain) is a misnomer. Truth to tell, anything goes as long as it's big, beautiful and expensive. Spanish correspondent Arnaldo Correia reports from the 25th anniversary extravaganza
In this final résumé of radio systems David Ashby examines the choice that's available to those who demand the best and are quite prepared to pay for the privilege
Following his introduction to the Arduino microcontroller and his trial servo exerciser project, Chris Bott gets serious and builds a multiple parameter telemetry unit
R/C through the lens
David Ashby reports on a fine February, an unexpected opportunity for some early test flying, and a dose of pleasantly civilised hill soaring
Famed for producing over 300,000 Bees, the E.D. company didn't just make engines. Shaun Garrity rolls back the years...
Spurred on by the nostalgia of thumbing dog-eared Keil Kraf t catalogues, Tim Hooper relives boyhood dreams and creates an R/C version of a svelte control-liner from yesteryear
WIZARD OF OZ
Brian Winch turns the tables in search of a solution to an engine problem and offers to ‘serve’ in a game of Q&A tennis
With model masked and spray gun in hand, an apprehensive Alex Whittaker hits the ‘paint’ button and buries some long-standing fears
It's an issue you won't want to miss so be sure to pop along to your newsagent or model shop and pick up your copy for just £5.50. Better still, why not save yourself some money over the long run, grab a gift and get your copy before anyone else by subscribing? Don't forget the Subscriber Extras too! If you would like a single print copy, you can purchase one from www.mags-uk.com.
|RCM&E May 2019 issue chat|
Tim Hooper - Skystreak 26 By Braddock, VC
by Braddock, VC
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!