Date added: 02/06/2019 18:22:56
Spitfire 90 manufactured by flair products. This model literally IS almost ready to fly and is yet to be flown. Engine and retracts installed. A general spec of this model is as follows; * Wingspan - 1800mm (70.8") * Lemgth - 1420mm (56") * Engine - OS 120S-E Four Stroke with onboard glow assist * Propeller - Graupner 38-20 / 15-8" * Radio Gear; * Receiver - Futaba 35MHz FP-R138DF 8 Channel * Servos - 6 x Futaba S3003 1 x Hitec Deluxe HS-475HB (Hi-Torque servo for flaps operation) * Battery pack - 2400mAH 6v *Retracts - Robart pneumatic retracts with adjustable air pressure to each air ram. Other features; - Visual receiver battery health indication in the pilots cockpit instrument panel. - Electronic glow driver unit This model will come with it's instruction / assembly manual and I will also include a diagram I made of all the servo, reciver and glow driver wiring. The pneumatic retracts include the air receiver and pump for charging the cylinder. One of the retract arms is a little sticky and could use a bit of bedding in with some light oil. At this moment in time, the model only has a small temporary fuel tank fitted for the purpose of running in as the supplied tank I was not personally happy with. I reccommend a higher capacity tank as a permanent one. The fuselage has extrenal charging points on it for the receiver and the glow driver battery. I will also provide a spare cockpit canopy and a three-bladed Graupner propeller with this model. The model will also come with an ultra light-weight pit cradle.
Please log in to view ad contact details
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!