gliggsy

Just been offered the 18 sz by a club mate, asked if I could have a good look over the weekend before deciding but unfortunately I have quite a few frsky TFR6 rx's and they aren't compatible so although it's a decent bargain it's not financially viable for the amount of non compatible receivers that I already have

Hi guys, I remember there was a time when there was a free competition to subscribers of the mag' I did win a clean sweep around 8 years ago I think, I was talking to one of my flying buddies last night and he had no knowledge of the competition page and I think he said he'd subscribed for 20 years or more, did I imagine it, was it forum members only, was there no competition in the mag?

Larger b&q carry it marketed as "dial polystyrene insulation board" it says polystyrene but it's definitely depron, 6mm & 3mm, Google it

Swapped and reversed many electric shafts, some bought and others home made. from piano wire, grooved for circlip with dremel and cut off disc, the fact that replacement shafts are sold would indicate to me that it's OK do dismantle and rebuild electric motors, model engineers is what I thought we were!

Do a Google for flitetest

I could of told most of you that this would happen!

Ha ha now we know why there's a world short supply of depron!!!

Hi fellas, don't know if anyone's aware but gorilla glue , once it starts to get too thick to use then give it ten seconds in the microwave, brings back all it's viscosity..

Hi fellas, don't know if anyone's aware but gorilla glue , once it starts to get too thick to use then give it ten seconds in the microwave, brings back all it's viscosity..

Hi Simon, just started reading this build blog today, got to say I'm impressed with your tenacity and engineering skills, it's always interesting to see what technology is being utilised for non traditional balsa bashing. Now I've read so far and following, any chance of posting links to your other builds or is it in your profile.... Glyn

Hi, I've also been pondering this one and either thought about sanding b&q 3mm down to 2mm or I have been looking at the hb10 food boxes from ebay, each box would give you two sheets roughly 200 x 120 mm, 25 boxes for about £7, don't quote me but I think it's 2mm, a call into your local kebab shop may confirm.. Glyn

So, how does it fly

Also, see here https://www.modelflying.co.uk/forums/postings.asp?th=140118 . A good read

Just recently built the edge and had a dozen flights before the Xmas , used the hot glue and didn't have a problem although,like you, I was thinking that the glue would set before I had the chance to complete the joint, it was never a problem once the glue got up to working temperature. The motor mount isn't substantial enough, you need to beef up this area, evidently the waxed paper is a pig to paint and there isn't much that will adhere, I have bullet tape on mine in red bull blue n red but no graphics. The flying characteristics....... One of my most forgiving aeroplanes in the hanger, takes off easily and straight as an arrow, will perform 3D and aerobatics easily, tracks straight and inverted is a piece of cake even for me! 2200 mah 3 cell and a park 450 motor, can't remember prop size but will check and update......glyn

Built one a month or so ago, flies like a pussycat on a 2200 3 cell, really floats but very capable aerobatics motor mount could do with beefing up, think your coat hanger idea won't stand up, too soft, 2.5mm piano wire would be good