gliggsy
Members-
Posts
110 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by gliggsy
-
Just been offered the 18 sz by a club mate, asked if I could have a good look over the weekend before deciding but unfortunately I have quite a few frsky TFR6 rx's and they aren't compatible so although it's a decent bargain it's not financially viable for the amount of non compatible receivers that I already have
-
Hi guys, I remember there was a time when there was a free competition to subscribers of the mag' I did win a clean sweep around 8 years ago I think, I was talking to one of my flying buddies last night and he had no knowledge of the competition page and I think he said he'd subscribed for 20 years or more, did I imagine it, was it forum members only, was there no competition in the mag?
-
Larger b&q carry it marketed as "dial polystyrene insulation board" it says polystyrene but it's definitely depron, 6mm & 3mm, Google it
-
Swapped and reversed many electric shafts, some bought and others home made. from piano wire, grooved for circlip with dremel and cut off disc, the fact that replacement shafts are sold would indicate to me that it's OK do dismantle and rebuild electric motors, model engineers is what I thought we were!
-
Hello from Oxfordshire-first build project advice please
gliggsy replied to Dee Rama's topic in Why Not Say Hello....
Do a Google for flitetest -
I could of told most of you that this would happen!
-
Ha ha now we know why there's a world short supply of depron!!!
-
Any better ways to store glue ??
gliggsy replied to Christopher Morris 2's topic in All Things Model Flying
Hi fellas, don't know if anyone's aware but gorilla glue , once it starts to get too thick to use then give it ten seconds in the microwave, brings back all it's viscosity.. -
Any better ways to store glue ??
gliggsy replied to Christopher Morris 2's topic in All Things Model Flying
Hi fellas, don't know if anyone's aware but gorilla glue , once it starts to get too thick to use then give it ten seconds in the microwave, brings back all it's viscosity.. -
Hi Simon, just started reading this build blog today, got to say I'm impressed with your tenacity and engineering skills, it's always interesting to see what technology is being utilised for non traditional balsa bashing. Now I've read so far and following, any chance of posting links to your other builds or is it in your profile.... Glyn
-
Hi, I've also been pondering this one and either thought about sanding b&q 3mm down to 2mm or I have been looking at the hb10 food boxes from ebay, each box would give you two sheets roughly 200 x 120 mm, 25 boxes for about £7, don't quote me but I think it's 2mm, a call into your local kebab shop may confirm.. Glyn
-
My last foam board build before the balsa journey
gliggsy replied to Bob Smitham's topic in Build Blogs and Kit Reviews
So, how does it fly -
Also, see here https://www.modelflying.co.uk/forums/postings.asp?th=140118 . A good read
-
Just recently built the edge and had a dozen flights before the Xmas , used the hot glue and didn't have a problem although,like you, I was thinking that the glue would set before I had the chance to complete the joint, it was never a problem once the glue got up to working temperature. The motor mount isn't substantial enough, you need to beef up this area, evidently the waxed paper is a pig to paint and there isn't much that will adhere, I have bullet tape on mine in red bull blue n red but no graphics. The flying characteristics....... One of my most forgiving aeroplanes in the hanger, takes off easily and straight as an arrow, will perform 3D and aerobatics easily, tracks straight and inverted is a piece of cake even for me! 2200 mah 3 cell and a park 450 motor, can't remember prop size but will check and update......glyn
-
My last foam board build before the balsa journey
gliggsy replied to Bob Smitham's topic in Build Blogs and Kit Reviews
Built one a month or so ago, flies like a pussycat on a 2200 3 cell, really floats but very capable aerobatics motor mount could do with beefing up, think your coat hanger idea won't stand up, too soft, 2.5mm piano wire would be good -
LMS, get the relevant size piano wire and make your own, a Dremel helps as piano wire is too hard to cut with hacksaw.g
-
Ha ha, I'm with Ben on this one, suffered the specky disease myself. Gg
-
Bent shaft or unbalanced blades???
-
Hi Les, have just seen a post on phantom pilots forum that was asking a similar question, suggest that would be the best place...g Edited By gliggsy on 10/11/2016 20:14:11
-
Heard sone strange points of view here, some folk think that banning something makes the problem go away, a bit like heroin, drink driving, speeding and anything else that's been banned...the problem just vanished
-
I'm with Ben on this one and not sitting on the fence. Just recently got my Dx7 back from HH. Said they couldn't find any fault but replaced rf board for peace of mind. Not been a problem since but it is early days yet. Would suggest op send the tx to H H before it causes more grief....g
-
dx6i working perfectly !!!!!! .g
-
Hi Ben, got to say you had my sympathy with your saga, I couldn't at the time be positive that I had the same issues, I am sure now and there is no amount of trying to blame anything else would convince me. Sorry guys and I do appreciate any advice or help that may give me another idea to try but after following Bens thread I think I have covered all the simple things, this problem, imo is the one that you can't see.....the signal.....g
-
Hi guys, Steve, I did say that I would be ditching the DX7s after being repaired but if they do change the board or find a fault then I suppose it would be sensible to stick with it given the amount of rx's that I have but.....It will only get the one chance, if it fails it will finish up under the wheel of the car. I followed Bens thread last year, can't remember if I posted but I certainly empathised with him .. C8 these are electric models fella, 3cell lipo, batteries weren't an issue....g
-
Transmitter now in the hands of Horizon, watch this space......g