Anthony Billings

Totaly agree with Barrie, the SLEC jig is excellent.

The instruction sheet that comes with the roll of Solartex, Solarfilm etc are very good. Tony

Yes please.

Hi, I too have used the heat method for releasing loctite and it works well. Tony

Hi, I too used to have problems with Deans, but now I have changed over to EC3's and EC5's no more problems, and a lot easier to solder. Tony

Hi and welcome, you will find a very friendly and helpful bunch on here. Tony

Hi, if you go to the heliguy website, you will find a guy on there called chopperadict, follow the link to his website and you can download his free tutorial which shows how to do the full setup and diagrams on how to use the pitch gauge correctly. If you have problems then pm me and I will go through it with you. Tony

Hi, motor to esc to lipo, test the motor for direction of rotaion, if its wrong then swap any two wires from the motor to esc around. Tony

Al fridays are good as the next day is the weekend, even better if there is a freebie involved.

Hi Ian, helifreaks is a good site, finless bob posts on that site, loads of good set up vids. If you are after a UK site then heliguy will serve you well, a guy called chopperaddict posts on there, he has his own site as well with lots of hints and tips and set up guides as well. Tony

Hi Peter, Spectrum are a good brand, I use a Dx7 myself but it's what feels comfortable to you, try a few at your LMS and see how they feel. A lot of the BnF models are fitted out for Spectrum Tx's but the PnP you can fit what system you like. Either way you can kit yourself out fairly cheaply these days, you can pick up a Dx6i for not much money nowadays. Tony

I hope there will be lots of photo's on the club website. Tony

Yes, rub it in some more lol Tony

Hi, I am away at sea at the moment, so do not have my tx to hand, but if you have the manual there is a small section on how to return the tx to it's default factory settings. Tony

Hi again mate, where did you get it from, as it should have come with lipo's in the first place. If it is the V1 it will use a 7.4v lipo, if a V2 then it is a 11,2v lipo and yes you will need a lipo charger. Tony