Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Tim Chambers

Members
 View Profile  See their activity

  • Posts

    41

  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Tim Chambers's Achievements

0

Reputation

  1. Tim Chambers
    I used a 3s 2200 mAh lipo (see photo) because thats what I had, the motor is a 2200 kv I think, because thats what I had, but you could probably use a much smaller motor I only use about 2/3rds power for a steep climb.
  2. Tim Chambers
    Oh and it might need some downthrust ,I put a packing piece behind the top of the mount.
  3. Tim Chambers
    Easy, just saw off the nose block ,glue on a plywood "firewall" and screw on the motor mount. you may need to move the servos back under the wing to make room for the battery. Yes that is a very old Middlephase circa 1986 I think.
  4. Tim Chambers

    991.jpg

    Tim Chambers posted a gallery image in Member Albums

    991.jpg
  5. Tim Chambers

    990.jpg

    Tim Chambers posted a gallery image in Member Albums

    990.jpg
  6. Tim Chambers

    989.jpg

    Tim Chambers posted a gallery image in Member Albums

    989.jpg
  7. Tim Chambers

    988.jpg

    Tim Chambers posted a gallery image in Member Albums

    988.jpg
  8. Tim Chambers
    Tim Chambers joined the community
  9. Tim Chambers
    Just keep one of these in the boot.
  10. Tim Chambers
    Flying Sorcery : Al Stewart.
  11. Tim Chambers
    Posted by David Davis on 05/10/2019 06:55:59: Are there any good shops in Somerset? I'll be staying there for a few days next week. There is the Hobby Hangar in Yeovil.
  12. Tim Chambers
    I'm holding John Woodfield to blame for this ,all those glorious classic gliders he keeps posting up on youtube. I was rummaging about in the workshop and I found some TE and LE strip along with some rib stock and before I knew it, I had cut out 24 wing ribs and by the end of the day I had a nice set of wings. Now a wing is in want of a fuselage so I had to draw one and a tail, this is the result. Now the wait for a nice day to try it out.
  13. Tim Chambers

    Tim Chambers posted a gallery image in Member Albums

  14. Tim Chambers

    Tim Chambers posted a gallery image in Member Albums

  15. Tim Chambers

    Tim Chambers posted a gallery image in Member Albums

  16. Tim Chambers

    Tim Chambers posted a gallery image in Member Albums

×
×
  • Create New...