chris Bond - Bondaero

Hi I have just completed my first simple drawing of a motor mount in CamBam but not attempted to assign any machining code. Is there anyone on here that I can send the file to that can cut it for me .Ideally I am aiming for 2 pieces cut from 2mm carbon but would seem sensible to cut from ply first as I really am at the very bottom of the learning curve. Payment will of course be made. Any advice appreciated

Following on from the very popular BMFA "In the Air Tonight" - An introduction to Aerobatics, the LEICESTER MODEL AERO CLUB are to host an event on Saturday 7th August (subject to Covid regulations) at our site near Market Harborough Leicestershire. Places are limited so please book early. During the day, you will be assigned to an experienced Mentor who will be able to assist with correct model set up and all important model trimming. (some of the mentors have represented the UK at World Championship events) Any model that is capable of a loop and a roll will be suitable but must comply with an 82db maximum noise limit. You will be able to hone your skills throughout the day and for those interested will be able to enter a low key Competition at the end of the day. These events are a great opportunity to take your present flying abilities and develop these onto new levels. Please follow the link below to apply for a place and select CLUBMAN as your entry. NB for this event you DO NOT have to be a member of the Great Britain Radio Control Aerobatic Association (GBRCAA) nor a member of the Leicester Model Aero Club. https://www.emailmeform.com/builder/form/ejdRolp3f4Txck19 Should you require any further information, please do not hesitate to give me a call or drop me a pm.

Thank you Peter, Hi Mike, I am sorry that you are having problems with your order. I have just logged on to catch up with orders placed over te bank holiday weekend to get them all on the way in the Morning. I have four orders on the system from you, two for one book and two for two books none have which have progressed to checkout and no monies have been paid. Please do not hesitate to give me a call ( I will be in the office until 6pm and from 10 am in the morning. 07811 196418.) and I can get you a book on the way. Chris (Bondaero)

Just a heads up on this part kit of the Vesna slope soarer which I have underway. So very impressed with the kit and is starting to look pretty. Great lockdown winter project for the experienced or inexperienced builder. https://uk.video.search.yahoo.com/search/video?fr=mcafee&p=vesna+glider#id=2&vid=959b132ef9e10e5e0a8a174d4269a6a0&action=view

This will work on 4s https://www.bondaero.co.uk/Turnigy_5045_Brushless_motor/p1085152_20839458.aspx

Demo Acrostar now complete except for stickers

Just got in under the wire AeroArrows thanks Chris