Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Brian Lambert

Members
 View Profile  See their activity

  • Posts

    390

  • Joined

  • Last visited

 Content Type 

Everything posted by Brian Lambert

  1. Brian Lambert
    I think you are looking for stencil film
  2. Brian Lambert
    Depron is normally available from the balsa cabin.
  3. Brian Lambert
    The slightly shiny rubbery, bendy stuff rather than little bobbles stuck together is EPP expanded polypropylene.
  4. Brian Lambert
    2024-T3 is probably what you need.
  5. Brian Lambert
    Have we tried pluging in a servo to the throttle cannel to check the receiver is working?
  6. Brian Lambert
    Another vote for Cura. And yes use the latest version on there web site.
  7. Brian Lambert
    The file from thingiverse will be an STL file, you need to run it through a slicer to produce a "g"code file that the printer can read.
  8. Brian Lambert
    Do we know it is illegal? Does it have a CE mark on it? if so it would be legal to operate in the UK.
  9. Brian Lambert
    Don't forget that the UK is not in the EU anymore! There is no reason that non EU radio gear can not be used it will not cause any problem to others or yourself. There may have been a technical offence of importing a non compliant electronic device, but if it was not for the purpose of trade then I am not sure it applies. Scrape the label off and go flying. Other advice will be along soon I am sure.
  10. Brian Lambert
    You could lift a Mini with that, or at least make it go very fast.
  11. Brian Lambert
    Yes the S148 will work with the R8EF receiver.
  12. Brian Lambert
    Could it be carburettor icing? As for the chain bearingboys.co.uk carry lots of chains.
  13. Brian Lambert
    Just a thought, is there a capacitor (condenser) across the points? they can fail shorted when hot.
  14. Brian Lambert
    They do say on their website that Royal Mail can take up to 14 days!
  15. Brian Lambert
    "We definitely need something plug and play" Better up the budget then, look at some of the educational offerings for really easy to use machines.
  16. Brian Lambert
    Of course 3D printing can turn into another hobby. There can be so much involved.
  17. Brian Lambert
    Latest open TX is version 2.3.11 probably best to go for that one.
  18. Brian Lambert
    I have one of these probably the best value for the money, but at this price they need a bit time to get to know how to get a good print.
  19. Brian Lambert
    No personal experience, but these people have been used by others on here.
  20. Brian Lambert
    May see you at the field then, Dave will sort you out, but if you need anything answering just PM me.
  21. Brian Lambert
    Spektrum transmitter?
  22. Brian Lambert
    Now I know nothing about the workings of these transmitters, but wouldn't the designer put a 3db attenuator on the higher output chip so that all protocols would benefit from the full output power allowed? Just a thought.
  23. Brian Lambert
    Hi Mr Bones, we could use some younger members in our club, so if you are looking for a "local" club put us on your list, Surrey radio control club
  24. Brian Lambert
    I am confused 4dbm is only 2.5mW this can't be the out put power can it? It must be amplified for output and therefore the P.A. power would be more relevant. I told you I am confused!
  25. Brian Lambert
    I think this applies to the Radiomaster transmitters with the multi protocol module. But please do a range check before flying.
×
×
  • Create New...