Martin U
-
Posts
148 -
Joined
-
Last visited
Martin U's Achievements
0
Reputation
-
Martin U joined the community
-
Nice choice Adrian, I have 2 lasers and they are a delight. Saito 180 in my Stampe which is similar regarding reliability and sound. Enjoy
-
Martin M it is a Precident model with a Saito 180 but 3 servos at the tail. presently with 3 mm rod but I am planning to change them to carbon fibre.
-
Ni Nick, no I have not. The wings all seem very fixed and I already feel it will take ages to set up each time for flying! not flown yet so could fit later if needed.
-
I flew at Mid rate setting, I've only flown mine twice while I tried to sort the power issue, very easy to fly and the large throws seemed Ok with care. At the moment I have throws as per the manual with High/Mid/Low rates set as: H = 100% No Expo M = 70% / 40% Expo L = 30% / 60% Expo Like you I felt the throws to be massive and wanted some step back if required. I'll test on the next decent flying day
-
Many thanks all for the inputs. Why do I never read the instructions??? It is the std Ripmax setup with Quantum 11 55 Brushless and Quantum 80A ESC, 13x6.5 APC. Resetting the ESC seems to have worked and I have way more power on the ground. Watt metter report: 1.5 Wh 60.06 Ap 1,158.9 Wp 0.078 Ah 19.16 Vm Just need the wind to drop to take to the air and see.
-
i have purchased a pre-flown Bolero with std power train, the previous owner dabbled with 6S. Prop as per guide and new 5S battery. Performance is very disappointing and I suspect the ESC is compromised. How can I confirm if the motor esc combo is the issue? Any suggestions please. Or is the std power train underpowered? Thanks for any ideas....
-
Thanks Cymaz, that was a hasty placement for the photo. Plus I was planning fitting out the cockpit.. For the maiden the pilot will be correctly placed as I’m not sure I can handle it on my own 😏 I’ve been Spektrum since I came back to the hobby and have been pleased overall. However horizon withdrawal from the uk has me seriously considering a move. That is a big decision as ( don’t tell the wife) I must have 18+ RX + telemetry.
-
Thanks John, Yes I'll put some decent 2000-2300 Mah and use telemetry to keep an eye. I'm planning black scallops on the leading edge as seen earlier in this thread. That plus sorting the cockpit will keep me occupied until spring..
-
Hi Martin, it is a Saito 180. Brand spanking so I will have bench runs over the winter as I hate 'dead sticks'!!
-
Well I finally have some progress with my Stampe. I just had no time to finish and a friend had some time on his hands and persuaded me to let him do a little work. Wow he has done an amazing job for me and with some winter fettling it will be defying gravity next year. It will have been 3 years since I started.. Edited By Martin U on 21/10/2017 15:54:42
-
-
Thanks for all the great inputs. It is for a Stampe 1/4scale bipe with a Saito 180 It is a new build not yet flown so nothing fitted yet [apart from servos] The servos are Hitec D645MW's. Edited By Martin U on 21/10/2017 15:42:47
-
I have a large 1/4 scale plane with 5 digital servos and one std. Recently with another plane I had an incident when I flew too many times [the weather was just great!!] and I had a power failure smash. I've also had some issues with low RX battery and AR8000's. So I'm very aware of power demands from my new plane and don't want a power loss issue. Yes I know I can use telemetry and on-board voltage checkers but I want to extend the power capacity. So can anyone suggest suitable setups? Things like Power Box look great but expensive. There is plenty of room as it is a large plane. Thanks for any suggestions. Martin Edited By Martin U on 21/10/2017 10:11:11
-
So remote it is, I'll sort that out. Many thanks for the responses guys.
-
I have just acquired a laser 75 that is at least 24 years old and it runs a treat. The position of the plug is at the front of the head so I can't use my normal glow stick. For my bench run I dug out my old wired lead but I could not get it off when running. Does anyone have suggestions for the plane mount? My assumption is that I wire up a remote fitting but I'm interested in any ideas. Thanks all.
