malmaz

Just finished this Chilli Breeze built from the RCM&E plan (Electric version) using the setup recommended by Delks and 4 max with 4s 3000 mah lipo Ready for a decent day to maiden it.

kc Sorry about that, I will be ordering my wood after xmas, I wont bother with Sarik Hobbies I was very disappointed with the last complete wood kit I purchased from them at over £200, Sooner buy the wood and cut them out myself and save money. lol

KC Thanks for that. Regards

KC I would be obliged if you would kindly put your estimate of balsa on here thank you.

My insurance have been in touch with me this morning and have made an offer for my car, which I have declined, they would not pay any compensation for my daughter to come and collect us from the airport, a 250 mile roundtrip. Also my NCD will drop from 12years to 4years on my next renewal. I mentioned that article Martin, to my Insurance and they said it was the Big company's that were doing this and They might follow, So much for customer service, Kick you in the teeth when your down in luck, comes mind.

My car was parked in this car park on level 3 Parked up on Sat 7th oct, we was on holiday in Majorca and was in informed by Luton airport car parks about the fire, me and my wife are totally besides ourselves over this. We arrived back at Luton yesterday lunchtime to see for ourselves the destruction we our absolutely gutted by this, we received another update from Luton this morning that building is unsafe and they deem all 1405 cars in the car park will be unsalvageable. 😧

Thanks for that KC, I have downloaded the Ribs pattern.

For a winter project I am going to build the Chilli Breeze, I have already downloaded and printed off the Outerzone plan and I will be building it with the built up wing and going down the IC route. My Question is does any one have a list of the balsa sheet and strip wood I will require without having to go over the plan and list the sizes and quantities that I will require? Regards Malmaz

Ok once again Philip thanks for that, I think I will stick with the new charger for now and perhaps get another power supply in the future. Regards Malmaz

Thanks for that Philip, my other charger I have is a single output which I have been using to charge my 6s lipos, would I be able to use that at the same time as the new charger so I would be charging 3x 6s at the same time or would that be too much for my power supply? Regards malmaz

Sorry for another question regarding chargers, I purchased the Toolkitrc M6d dual output charger my question is about the input voltage. My power supply is a Hobbyking dual output 540w (not 1000w as in my previous post ) I have had this power supply many years and pleased with it, the output voltage range is 13.8 - 18v and is set at 18v the new charger input is 7 - 28v if I charge 2x6s 5000Mah at 5a each will the 18v output of my power supply be sufficient ? Thank You Malmaz

Yea Changing theme to default has worked for me.

I am using Windows 10 and Edge also Firefox, works ok with Firefox but with edge I have to refresh the page.

Thanks for your reply's, I think I will go ahead and purchase the toolkitrc M6D, for information I have a Dual output 1000w power supply so I think that should be ok. regards Malmaz

I am after buying a new charger to supplement the one I have, I am after a dual output charger that would be suitable for my 6s 5000mah lipos, I have been looking at the ToolkitRC M6d charger, my question is would I be able to charge 2x6s 5000 mah lipos at 1c at the same time? also do anybody recommend any other dual charger to charge the above?. Regards Malmaz

Yes Full respect to the man

Hi This is the wots wot I built with the modification, the 2 nylon bolts that hold the top wing in place don't look that bad. I sold the model earlier this year, and the new owner was well pleased with it.

I have been using Windows10 built in security for some years now and not had any problems.

It's covered with Hobbyking white film and then car vinyl for the colours.

Pleased with how my new build Chris Foss Acrowot flys, fitted with an OS55AX.

Keeping my fingers crossed it goes ahead this year.?

Just finished building an Acrowot, do any of you fellow modellers dope or sanding seal the model before applying iron on film? Regards

Thanks for that Jesus, Its to run 4xservos on the wing, I will look into the other options you mentioned. Malc

Can someone advise on Sbus and my SZ18 tx setup. I am going to use standard servos with my Sbus system and I know I have to purchase a Futaba SBD1 Decoder to run these servos, on my transmitter I can program Sbus servos etc but my question is can I programme the SBD1 decoder with my transmitter or do I have to purchase a Futaba SBC1 programmer to program the Decoder? Regards Malc

Thanks David, I received the BMFA Email This Morning am now Gutted about that.?