Wihtgar
Members-
Posts
88 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Wihtgar's Achievements
7
Reputation
-
Yes, Thankyou Ron. I shall leave the nylon inners in place. Nigel
-
How do you manage to remove the hubs from the front wheels Ron?
-
Warbirds Replicas Hawker Tempest V -Mass Build 2024(part two) .
Wihtgar replied to RICHARD WILLS's topic in Warbird kits
Thanks for the heads up on the servos Richard, I already have two of those. Run up the power train in my test jig (without prop) to check the esc and motor rotation direction. Still to turn the esc brake on. I have set up the model in companion, need to upload the TX, bind to SXR Rx and perform initial Rx calibration and all being well check stabilisation works as intended. Hopefully, working power and control systems should be ready to be fitted as the build progresses. Nigel -
Warbirds Replicas Hawker Tempest V -Mass Build 2024(part two) .
Wihtgar replied to RICHARD WILLS's topic in Warbird kits
Hi Richard, What servos are you planning to use? Nigel -
Got me too. Pretty sure I got hooked clicking on an account conformation link purporting to be from Nexus models. I can't believe I got caught by that one. Anyway, new card on its way after bank spotted small amount Lifewatch taken out of the credit card account. Thing is I thought the automated call from the bank was from scammers until I contacted the bank after the third call. I couldn't see any suspicious activity on the account as the bank had stopped the transaction so beware folks.
-
I've also got an unboxed S8R which I will also have a go at setting up using the above info. If all looks OK I will try it with my WR Tempest. Nigel
-
We value your privacy pop-up on every page!!
Wihtgar replied to Christopher Long 1's topic in Report A Problem
Not working for me either! -
A Very Merry Christmas To Everyone.
Wihtgar replied to aidan mcatamney's topic in All Things Model Flying
A Merry Christmas and Happy new Year to you all Nigel -
Just came across these recent posts. I sympathise David, many years ago we looked after a couple of hamsters at different times which both escaped. One from my brother and another from friends. One of them, I can't remember which, gnawed a perfect round hole in one of our hall curtains. As for a second model, a mossie has always been on my bucket list. Nigel
-
Sorry Richard, I have 4S batteries so will go for either 12X6 or 12X5 Nigel
-
I've a couple of Overlander 5000mAh lipos weighing 475gm and aprox 38X44X132mm. Would these be OK in the Tempest Richard? I am thinking of using these with a 3548 900Kv Overlander motor and 12X6 prop. Regards Nigel
-
Hi Richard, a while back, you were talking about inexpensive motors (about £20) to power these models. Have you one in mind as I have no spare ones to use. This will be an interesting build for me as the last model I built was a glider called La Mouette around the early 1960's although I have become quite proficient at repairing foamies in the last few years!
-
Put me down for a tempest please Richard Nigel
-
Hi EarlyBird, thanks again for the help but there must be something wrong with my account. When I log in I am taken to My Account. If I navigate to RCM&E the system expects me to take out a subscription which My Account shows I already have. I will contact Mortons on Monday to sort it out.