andy paterson
-
Posts
82 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by andy paterson
-
I have found that the Anniversary Piper cub is the same spec and C of G is 3 1/2" to 4 1/4" from leading edge Thanks all
-
Thanks Cuban8
-
Thanks all John Lee brilliant looks like I'm on target . I've built a few planes but always have plans really looking forward to flying this
-
Hi all I have picked up a Carl Goldberg IC Piper Cub but have no idea on C of G for this plane, some sites have said 1/3 some have said 1/4 back from LE root, is 11" span is 76 1/2", at the moment C of G is 4" from LE right on wing spar . No one has seen this fly or if did fly Looking forward to your relies
-
Can someone tell me why some tiger moths have a plate ontop of fus just before tail section and some don't , I believe it's on the 82a and will it cause a problem if it is not Kit is an old DB Tiger moth 58"
-
Thank you Andy these are a great a help ,that shows me my couple of planes are not suitable
-
Brilliant John thank you
-
Fair play John Stone but not knowing how accurate the flying has to be and I can only find one BMFA B cert video online maybe you could point in the right direction please .
-
One I'm looking at the moment is 48" Miss Sizzles from RCM&E July 2020 ,it's an aerobatic model electric power.
-
Book is ordered thanks , think a wotty is in order , thanks all for the replies
-
Thanks capt
-
Hi all Looking at going for my B cert , which plane would you recommend? I have wot trainer and eflite tractor both electric, I don't fly with SAFE? happy to build or artf ,I also have IC engines up to Irvine 53 but not in planes . Looking forward to your views
-
Thanks all , I like your thinking, will chew this over tea and cake I think ,Dave,S like the idea of SIG 4 star , whilst chucking stuff up in the loft I have found a half complete SIG Liberty Sport 40 - 60 engine required mmmm
-
I do like scale mainly
-
I also have a Irvine 53 two stroke!! Would that help with something 😂😂
-
I have a Saito 62 4 stroke itching to go in a plane but which? I can build from plans, scale or anything, even a wot 4 but I would like the engine upright , What would you recommend ? winter project.
-
Seagull 40 low wing electric conversation
andy paterson replied to andy paterson's topic in General Electric Flight Chat
That sounds ok to me, I build as well so should not be a problem ,with out the plane or seeing one at hand ,did not want to get it and find I have to make major changes , thanks again Denis -
Seagull 40 low wing electric conversation
andy paterson replied to andy paterson's topic in General Electric Flight Chat
Thanks Denis, just wondering about access for lipo ? -
Hi all This was asked in 2014 , but has anyone converted one to electric yet , setup same as boomerang I would say , not got the plane yet so not sure on the size servos , would love to see photos if possible.
-
Hi just a quick question DX8 1st transmitter with it work with a new plane that has SAFE . Andy
-
thanks Pete
-
I have a frsky V8FR-ll 8 channel receiver which i use with Taranis 2019 transmitter, can I put a frsky FLVSS smart port Lipo voltage sensor into the receiver and the Taranis transmitter receive the info andy
-
FrSky DJT 2.4ghz Module For JR Transmitters will this work with the new taranis 2019 plus se model ,I brought it for my 35mgz jr don't want to put it in and damage the tranny.
-
Will frsky V8FR-II receiver work with the Taranis D9X 2019 plus se Thanks
-
Thanks for the answers , I have a meter and see the motors draw and I also have a rev checked, time to play. Thank you all,
