Jump to content

Ian Bagshaw

Members
  • Posts

    44
  • Joined

  • Last visited

Posts posted by Ian Bagshaw

  1. Thanks think all sorted now turns out the smart port on the R8 Pro isnt working! One last question, on the Neuron II, should it count the battery cells as other esc's do? This one bleeps once and works fine just wondering?

     

    Ian B

  2. 7 minutes ago, Tim Kearsley said:

    A quick initial thought Ian, have you run the "Discover sensors" from the telemetry screen on the Tx?  The sensors don't show until you've done that.  Apologies if you're already aware of that!

    Hi Yes I have done that and no additional sensors are found. On the original version of the Neuron which works with Bl Heli software there was an option to turn on telemetry and wondering if i have missed a step with the STK tool or if I have a faulty ESC.

  3. Hi,

     

    Just purchased a Nueron II 80 and been following your posts, I have not been able to get the lua scripts to work either, I have the STK tool which is fine. But a more basic problem I have no telemetry from the ESC when using the smart port on a R8 Pro receiver.

     

    Any help appreciated.

    Ian B

  4. Hi,

    I have a Wots Wot kit not ARTF and am struggling to see from the instructions how the interplane struts attach to each wing. I have a slotted ply plate and the ply interplane struts but no mention of how they attach.

    Wondered if anyone has any info on this

    Thanks.

  5. Thanks for all the advice I was just wondering if anybody had a different clunk setup, the valve system is just a one way valve & I have been using them for 35 years...works perfectly

    Ian

  6. How do people set up their fuel tank and engine so you don't loose power in outside loops or whenever the plane is in a vertical dive?

    Currently my OS55 has a standard fuel setup with pressure from the exhaust with a one way valve, but when I'm at the bottom of the loop the engine is searching for fuel.

    Many thanks

    Ian

  7. I found an old post giving the CofG as 161mm from the leading edge which looks about right as a starting point. I've just set the whole fuselage level on the bench and with an incidence meter on the horizontal stabiliser levelled to zero the Firewall is pointing upwards....which I cant believe is correct.

    It's not going well......

  8. Hi,

    I have a fully built & ready to go for next season DSM Aerostar 69 would this qualify as an eligible plane to enter competitions?

    It's 25 years since I last flew an F3A competition and have no intention of spending the best part of 7k to fly with the big boys.

    Also have an Atlas that I'm building from scratch which may be ready in the spring.

    Thanks

    Ian

  9. Does anybody know where I could get a set of digital plans for the Atlas? I downloaded a PDF from outerzone but when you print them out they are not very accurate.

    Many Thanks

    Ian

  10. Thanks for all the help I have family in the USA who are going to send me a Navarossi for $39 even though its made in Italy

    I'll probably crash the plane first time out now!

    Ian

  11. Does anybody know where I can get a tuned pipe in the UK, I have tried just engines but they no longer have any stock. I have been told a Hatori 700 would work but can't find a supplier. Weston uk have some but they are un-baffled which wouldn't work at my club.

    The original plane had an OS red tuned pipe & a Hanno special, the restored version has an OS75AX.

    Many thanks

    Ian

×
×
  • Create New...