Paul Johnson 4

Quick example of settings available

Also when updating the firmware the printer needs all its E steps, probe off sets etc resetting

Try using the custom build page and make sure you have all the correct printer info entered. Also have you disconnected the z stop microswitch and from within the firmware builder selected to use the bltouch in its place. There is a lot of settings available from within the custom build page that are not available from the free download link, for a few dollars donation I find its worth it. Also check you have connected the bltouch correctly. I have the CR touch which is connected differently. It's usually something missed in either connecting up or firmware that causes issues.

Mmm ... screw loose... I know I have

No Problem.....IC = integrated circuit = Electronic Speed Controller....😛

Are we really talking planes here?

The plates are 1/8" Birch ply You'll break the retract before they give way..

Just stay with us and I can guarantee you'll get plenty more...

It drives master mad...

Ahh it's your fault then I have such acquired tastes......

As the wheel size goes up so does its thickness, the wheel as it is hasn't got a lot of room.

Na this is ugly...

While I think of it......the retract units are......HANDED.. so please don't think of fitting two units in one wing..

It may be a little while as sourcing is currently ongoing but watch this space.

All these parts are then Re-exported as DXF files and sent to the Kit cutter for laser cutting. Richard will do a blog on fitting the first one to create a guide for you to follow. He'll probably use a chain saw so anything could happen there! The same process is also being used to create the Tempests units. NOW can I have my sock Master?