Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

Tony Kenny

Members
 View Profile  See their activity

  • Posts

    344

  • Joined

  • Last visited

    Never

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Tony Kenny's Achievements

0

Reputation

  1. Tony Kenny
    Tony Kenny joined the community
  2. Tony Kenny
    HI All, Looking at the FrSky, trying to compare the X9 and X10, seems like there's not a lot in it besides the different OS and the X9 being about half the price. Unfortunately, none of the websites I've visited have offered any sort of side by side comparison. Can anybody advise on the differences? regards Tony
  3. Tony Kenny
    Posted by Don Fry on 22/06/2019 17:16:27: So now we have to ask Tony Kenny, has he got 2 grand, and that doesn't get a receiver to go in anything, or the anything. Not knocking Jeti, it has a fine reputation. But it's not the fodder you shove in a Wot4 Not really got 2 grand, at least not for a while. I like the look of the FrSky especially with the features to cost ratio! Thank you all for the valuable input! I'll be picking up a new tranny soon, but going with the old meaning of the word
  4. Tony Kenny
    Morning all, Im going to be opening a can of worms here, but its time for me to switch my brand of radio so I'd like to hear some views on which way to swing. Wy current brand is Tactic which was supplied with my first ever trainer so I was locked into that brand from the outset. However, I've found it difficult to source Tactic rx here in the UK and I've had a couple of dodgy ones so my confidence it the brand isn't high enough for me as I expand my fleet to model that require more channels and will cost more to replace after a radio malfunction! Initially I'm looking for 8 channels, but may be able to stretch the budget to 12 as a form of future proofing, depending on hon large the gap is. I've also heard systems with open source software which, as a developer' is of particular interest! Spektrum is a brand that I hear about most often, but I'm also concerned about brand lock in again. Although we also hear about 'compatible' or cloned components, I'm a bit wary of those as there probably no guarantee that they really are 100% compatible or even of a reliable quality. How safe is it generally to purchase used equipment? So, let's open the floodgates and see which way I should go! thanks in advance! Tony
  5. Tony Kenny
    Yep, we've become too reliant on convenience and these easy answers are just too tempting! I'm annoyed with myself because I was concerned that the battery wasn't properly secure but it had been OK in all flights for the past year so didn't so anything. That was my mistake, I should have gone with my gut and done something, especially knowing that each time I remove the battery I'm pulling on that velcro and the weak adhesive beneath it! I'll submit this photo to RCME too, maybe somebody else can learn from my mistakes. To make matter worse, i also ripped the motor mount out of my FW190. The u/c got damaged and other club members suggest just hand launching and belly landing and the prop would knock out of the way. Unfortunately, a couple of these landings knocked the prop but pull the motor mount out. Thankfully, that's an easy fix, but I wonder what damage these landings will eventually do to the motor shaft. I've bent enough on other model already. The moral again, fix the thing properly!
  6. Tony Kenny
    HI All, Some good advice thank you. Ben, I agree, it's not great on foam at all. My plan is to do the same as I did on the glider which was to use the double sided velcro that sticks to itself and glue that to the fuz so it's nice and secure. For this model I'll probably do that in 3 places and also consider adding an additional 'gate' by way of a piece of balsa under a couple of clips to just slot in place. I am a bit surprised that ARTF models don't tend to have any form of battery mount whatsoever and even those that do tend to be inadequate. The canopy of this one also had such weak magnets that it fell off the first time I flew inverted, which prompted me to add velco to that too. We live and learn, but it will be a while before I get time to fix this.
  7. Tony Kenny
    Hi all, I'm sharing this photo of my pride & joy after the battery was ejected whilst pulling out of an outside loop after performing various other high-G manoeuvres. Turns out velcro is quite reliable, but, the self adhesive backing is really weak! Battery came out leaving me with no control! Future plan: 1) more secure battery mounting, 2) a small lipo backup for rx & control so I'll at least have control if this happens again. I'm also considering some sort of latch on the battery connector so the weight of the battery cannot pull it out.
  8. Tony Kenny

    Tony Kenny posted a gallery image in Member Albums

  9. Tony Kenny
    Thanks for the nod towards hobby king, they have Turnigy 3200 4S 30C for £23.60 at the minute. (not the nano tech as suggested) That's around £15 cheaper than anywhere else! Perfect timing as a couple of mine are swollen and need replacing. David, to discharge, I just attached them to an old car halogen until it was completely dead then cut off the wires for later use and chucked it in the bin
  10. Tony Kenny
    Fantastic to hear, thank you! Just make sure it's accessible for anybody to grab Keep up the great work at the centre! Really looking forward to my next visit for the aerobatics day!
  11. Tony Kenny
    I've got a couple of motors with bent shafts, tried to straighten them, but that's mission impossible. Despite lots of searching, I've not found anywhere to buy replacements shafts only. Are they usually available and I'm just not looking in the right places?
  12. Tony Kenny
    Thankyou, the problems seems OK now, but waiting for the right time to get out and try it in the air. Broken servos, I tend to keep them just in case I get a similar one strip a gear, then I can enjoy a fiddly 3D puzzle! I did the same with a Rx that failed range checks, handy for bench testing (is labelled most clearly so I don't put it in a model by mistake!)
  13. Tony Kenny
    Just found this thread.... I've been to the centre a few times now, twice for the aerobatics training days which have been a fantastic learning opportunity for me and have really improved my overall flying skills. Facilities are great, everybody I met there were friendly and helpful. I look forward to visiting each month and also look forward to the accommodation blocks being available. The only thing I would add is, that given the average age of people in the hobby and given how far it is by road from the nearest town, I'd be tempted to install and AED (defribrillator) in case somebody experiences a cardiac event whilst on site. The difference, statistically, is taking survival rates up from 6% to 96%, provided of course, that they're not flying alone and somebody sees them go down within a couple of minutes! Maybe a fund raising event for that separately? I take it the air ambulance wouldn't have much problem finding a spot to land! Tony
  14. Tony Kenny
    Crikey, between this and my LiPo thread, I've managed to stat 2 simultaneous arguments! Personally, these connectors never "feel" secure to me, no matter how hard I tighten the screw,it just doesn't feel 'solid'. I'll fly with them at first, but ultimately, I'll replace them with something that 'feels' better to me. Whichever I use, my policy is to check ALL connectors, control surfaces etc, in fact a full head-to-toe inspection of the aircraft before every single flight. That's just my brain wanting a solid routine so nothing gets missed. (although distractions can happen and then things do get missed!)
  15. Tony Kenny
    As my experience makes it a lot less likely I'd buy an ARTF from HK again, I'd have hoped that the relationship based on money would make them listen. But, one voice among many. However, this has been a learning curve that I otherwise wouldn't have experienced, so there's a positive side too.
  16. Tony Kenny
    I'm hoping to try the model later this week or over the weekend. Shortly after I'll look at replacing those connectors. I also forgot to mention that the push rods had some sort of coating but that was pressed up against that connector and was preventing it from moving, so I had to trim some back (that was one of the original problems). All in all, a lot of little changes had to be made to make this model air worthy. Just wondering if I should feed back to HK or if they'd even be interested. PS. I am a "noob", only been flying a year, but do fly various different models and have made plenty of repairs and take pride in setting up my models well! Although, I'm pleased to say that despite my numerous crashes, there were never 2 for the same reason
×
×
  • Create New...