Jump to content

Karl-Georg Krafft

Members
  • Posts

    81
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Karl-Georg Krafft

  1. Wanted to try something different, so I built this plan from Depron sheet. It is based on plans and videos you find on the Internet ( Buschtrottel Agro). The model features a Fogleman airfoil, flaperons an leading edge slats which are fixed with Velcro as well as the landing gear. Flies great. Karl
  2. A clubmate gave me two rolls of Proficover - it's a bit like Oratex or Solartex, a very good material to work with. So I had to build something with it. The result was a control line stunter (Jamison Special) and the rc plane you see in the pictures. It's my own design and it had its maiden flight yesterday. To my surprise it flew very well despite the not too powerful old open-rockers Saito 30. Karl
  3. I like gullwings - both upright or inverted. So when I browsed through my old Model Airplane News magazines looking for inspiration I found "Gamma Gull" in the Jan. 1986 issue (also now on outerzone). I made my own plans based on those construction drawings and added ailerons and electric power (Graupner Compact 300 z) . It spans about 1.7 meters, is built from balsa and is covered with Oracover and HK film. Had its maiden flight yesterday - very satisfying, only needed some more downthrust. Karl
  4. Hi Greame, I tried to send you messages, but I was told you could not receive them. Karl-Georg
  5. Hello Greame Poke, I drew my own plans based on a 3-view by R.S.Hirsch. I could send you a copy of this 3-view if scratch-building is no problem for you. Karl-Georg
  6. Here's my scratch built Cessna GC-1, a not so famous 1929 air racer. It spans 1.57 meters, is powered by a Saito 72 and weighs 3 kg. I built it for the controlline events I visit once a year to compete in Scale and in Basic Carrier Deck flying - a nice diversion from my RC flying. The throttle is controlled by 2.4mhz RC, covering is hobbyking film, and it has sprung landing gear. Maiden flight soon. Karl-Georg
  7. Hi Mitchell, my model is scratch built - based on the plans you find on the internet. I inverted the engine ,used the landing gear of my late Lazy Bee and changed the structure in some details. Karl-Georg
  8. Here's my version oa Clancy "Speedy Bee". While all the original dimensions were not touched, I did some cosmetic modifications. Power is an OS 20 FP. Karl-Georg
  9. Here my two flying wngs: the smaller one - built and flown this summer - is a " Willow" ( 1,1 m span) and the other and newer one is a " Hai 1 Evo" (1,5m span). Both were built from plans that came with FMT magazines and which are still available at VTH Shop.
  10. Here my two flying wngs: the smaller one - built and flown this summer - is a " Willow" ( 1,1 m span) and the other and newer one is a " Hai 1 Evo" (1,5m span). Both were built from plans that came with FMT magazines and which are still available at VTH Shop.
  11. I think braided fishing lines like Spectra or Spiderwire are a very cheap alternative for models of this size. Check the controlline websites for the correct diameters. Karl
  12. For transport I put off one pair of wings of my Staaken Flitzer (scale 1/3.75, span 60 inches, OS 91 surpass). The two wings are held by the two wires that slide into the wing tubes for the piano wire stubs. In flight the wings are only fixedby the landing and flying wires. Theirends are held in place by a common piano wire - not very scale-like, but practical. Oh, I forgot to mention.... it's a control line model. Karl
  13. das IMy balsa stripper: a piece of 30x20mm wood, two m 3 bolts ,nuts and washers, different spacers (1mm, 1.5mm and 2mm ply) and a cutting blade. Simple, cheap, but effective.
×
×
  • Create New...