John Read 2

Hi, I recently acquired a hardly used Tactic TTX 650 Tx with 3 Rx's. Has the RCME reviewed this product or have any readers used/use this system? My last foray into R/C was nearly 50 years ago and involved a MacGregor SC system with escapements so , as you can imagine, my knowledge of modern R/C equipment is virtually non-existent. Although I have a manual , I would prefer to see some kind of visual tutorial coupled with a fairly detailed review . All help and advice would be appreciated. Regards John R

I would like to thank all those who replied to my original post - they certainly have made things clearer with their advice. I also went on YouTube ( I don't know why I didn't think of it before ! ) and found an excellent series of instruction videos under the Maker Hanger heading. I would certainly recommend these to anyone else who wants to explore the world of electric powered models that are radio controlled.

Thank you all for your input. I actually have a set up with a motor, esc and Lipo but I wasn't sure how best to connect them together and what connectors to use. Also, should there be an on-off switch in the system? It was a lot different in my last foray into RC which involved a McGregor Single Channel " bang bang " and escapement system ( which I still have ! ). Soldered joints seemed to be the norm but now there is a whole array of bullet connectors ( in different sizes ) and other plug and socket arrangements. All I want is some idea of which format is best so that I can standardize it for all my uses. My area will be predominantly slow park flyers that involves models that used to use the 0.75 to 1.5 cc IC motor range. Probably more what could be described as " radio assist ".

I have just returned to aeromodelling after an absence of 40 years and so much has changed! Although I accumulated a small collection of IC engines ( which I need to dispose of ) I have decided to go down the " electric route ". Can anyone recommend any literature that explains how all the components fit together and what means to use in connecting the various parts. I know the general opinion seems to be to consult local experienced aeromodellers but I prefer diagrammatic references and/or photographs. I purchased a copy of " Small Electric Flying Models " and " R/C Aeroplanes-A guide for beginners " but I still can't seem to find the info I need.