Jump to content

John Minchell

Members
  • Posts

    101
  • Joined

  • Last visited

Everything posted by John Minchell

  1. The other thing to consider is your eyes. I've just changed back from varifocals to distance lenses with a bifocal segment to read the tranny telemetry. Also ditched the grey or green sunglasses and gone to brown tint polaroids and I swear I can see the model 50% further away (gliders and a long way up and distance downwind). They are pin sharp now and I do not have the "tunnel vision" aspect of the varifocals of a small "sweet spot in focus " and everywhere else in peripheral vision is blurred. Worth an eye test for. John M
  2. Try Mike Ridley at Model Radio Workshop. An excellent chap and UK service engineer for most radios. He does a range of servo slow add ons. All made in the UK by him as well https://modelradioworkshop.co.uk/shop/servo-control-devices/servo-slow/
  3. Thanks for the replys gents - much appreciated. I've also spoken to the importers and to Frank who was a great help. So I can't use the SPC port to power the servos OK. I can Y lead any two servos with the Graupner battery backer output feeds one and two and then feed into any channel socket on the RX. Best solution is to leave the choke servo on a flylead and set it for the first start of the day with an external battery and a servo tester then disconnect it for flight. I do not have to only use ch9/batt as the only battery input. Use all 9 servo sockets one for each servo, but Y lead the two backer feeds to the two flap servos, as they will pull the most current. I can use any of the 9 channel sockets to input the power. That will get it flying this weekend.
  4. Fettling a model for a good mate but there are 10 servos and only 9 channels on the RX. It's a large glider tug and has a choke servo on a ZDZ 95cc petrol engine, so we can do without that. Servos are 2x elevator, 2x flap, 2x ailerons, a tow release, a throttle and rudder. All well and good till we get to the battery input which shares the same as channel 9. So first question is can I Y lead one servo (say tow release) and the battery into channel 9 port in the RX. Second question is where does the second battery feed go (from a Graupner twin battery backer device) as Y lead on the battery feed (after the backer unit) defeats the safety of having twin feeds into the RX and there is no free port left on the RX. Can I use the data port or not? Or do I Y lead another servo channel (1 to 8 ) with second battery feed into any other port on the RX? Third question, can I Y lead the flap servos (25kg each) so drawing a fair amount of current when deployed 90 degrees for every landing. Will the RX pc board handle high current at 6 volts when both flaps are down for each landing through one channel? TIA for any help. And no, "choose another radio" is not a option for him! John M
  5. I have high regard for George's advice and also his products especially the LiPo's he sells. However I had a 20 amp stand alone UBEC which failed internally and instead of only allowing 6 volts through (or whatever the jumper was set at voltage) it passed the whole 24volts of a 6S LiPo through to the receiver and servos. In a Thermix XXXL 5meter glider it took out a £250 Multiplex dual Pro receiver and 10 quality servos all burnt out, which was a little expensive to say the least. I will still use 4Max motors Esc's and batteries but no longer trust any brand of UBEC - so always carry a separate Rx and servo battery from the motor power battery. Just my 2 pence worth. John M
  6. You can if you're on hands free with an earpiece!
  7. Either that or grind up some 1/4 or 1/3 scale size zig zag blades for my pinking shears, that would be easier I think. Only need a blade jig like the ones used for sharpening chainsaw blades but attached to a drill bit sharpening grinder attachment. I'll have a play.
  8. Was wondering if pinked edge tapes could be cut on a vinyl cutter like a Silouette Cameo and how that could be done . IE. how to hold down the solartex or diacov whilst cutting it?
  9. Scale Me Down still exists - see their FB page here https://www.facebook.com/scalemedown/
  10. Erfolg If your first sentence was tongue in cheek, then I will have a chuckle. If you were serious in thinking that cheating would not happen at a WC, then I am afraid you are completely wrong. I was there as one of the two UK team managers for the scale F4C and F4H teams. We encountered a model not built by the entrant/pilot and two instances of blatant use of GPS positioning for the start and end of each manoeuvre which is also against the rules. Another adding/removing wire skids (to protect his wing tips in an untidy landing) when you are only allowed to remove the pilot and flying prop for a scale one between static and flying judging. I could go on......................... John M
  11. The issue of "is it ethical" to admit the source of either design, cad drawing and then the final production (3D printing, cnc machining, laser cutting etc) is only relevant for a competition. For a scale model just for general flying it's all irrelevant. The "tidying up of the rules" is needed because people have different idea of what is the important part. Is having the idea and spending the time designing/drawing in cad the difficult bit, or using someone else's design files to print on your own or a commercial company 3D printer etc etc. The only clear way to do this is design it yourself, do the drawing yourself and buy a 3D printer or 3 axis mill or whatever and make the part yourself. Then it is not needed to declare it. BUT it is all based upon trusting that the competitior is honest with the declaration. Having seen some blatant cheating in Switzerland at the 2018 Scale World Championships, I fear that any rules decided upon will be not enough to deter the cheats. However I don't think it will be too much of a problem domestically. John M
  12. Try Cloud Models https://www.cloudmodels.co.uk/contact they cut foam wing one-offs. John M
  13. Anyone have a copy of the plan they want to sell, or will copy, or let me borrow to copy please? Any cost incurred will of course be covered. TIA John M
  14. I just type the OP number into Word on the PC and duplicate it many times so I can print out on an A4 sheet of paper. Then cut with scissors and stick number side down onto a strip of sellotape then the excess sellotape around the outside sticks to wherever I want on the model. Number is protected with clear tape and removable if I sell the model or the number changes and 30 or 40 on a sheet of A4 plus tape costs next to nothing. John M
  15. Normal aeroplane - you need the best quality and torque servo on elevator. A tug needs the highest torque servo on the tow release and same or next best on elevator. The rudder on a tug may also need a grunty servo if the tow line can pull against it but you still need the rudder to work against the side load of a glider on tow. Applies to the glider as well. ( strongest servo on aerotow release). Oh, and don't be tempted to use a retract servo - they are too slow to release after you have flicked the switch - don't ask how I know that!
  16. James, Gliders Distribution do various ones for the glider end and may also have (but not on the website) tug ones. I got a 6 bolt flange fitting tug release from Stuart Mackay models - don't know if he is still trading. Also made my own as well - can take some pics if you need to copy it. John M
  17. Very nice - interested to know why 4 servos in a 3 channel model?
  18. Steve Webb models carry a line of really small DT indoor electronics - Rx, ESC, Servos, Spectrum clones etc. Also take a look at the Indoor RC FB page https://www.facebook.com/groups/619252605230388 as there are lots of tips + builds etc. which will build your knowledge base.
  19. Thanks for all the replies chaps. The Dynaglow straight will get used in older "loose" two strokes and I have secured a gallon of Laser 5 at Steve Webb models for my Lasers.
  20. Jon it is fuel specifically for Laser engines, or so I was told at the shop where I bought it. No castor oil and no nitro - Model Technics Dynaglow straight it is called.
  21. I have some 8 or 10 year old Model Technics Laser fuel, probably 4 litres left in a 4.55litre container, but has been tightly sealed for that time. Will it still be ok to use? John M
  22. I discussed this with Frank the other day on the phone as the same box (still unpacking after moving house) offered up the Merco 61 sparkie and also a 10cc Hornet from 1946 which I had refurbished. The thing is the Merco can go straight into a model and be run, but the Hornet or the OS K6 would need an rc carb grafting on and silencers making. I just fancied a 8 or 9ft vintage model with a sparkie for floating about at the end of a days flying and had a choice of powerplants for it. Looking at the Jasco Flamingo as a pretty model to build and will probably use the Merco, even though that is also NIB - but worth less than the OS or the Hornet.
  23. Thanks Frank I saw that - and the estimate was only £60 to £80. Yes Jon a dilemma indeed.
  24. Anyone ever used one of the replica OS K6 spark ignition engines in a model? They were made in the late 80's (OS only made 2000 of them). I have a NIB one and just wondering if it was worth keeping it un-run, or if it was ok to run it and use it? John M
  25. Yes it's interesting in that it has a micro switch bolted just in front of the exhaust outlet and operated by a cam on the throttle arm so that at low (25% or less) throttle it retards the ignition to stop it being too advanced at tickover and stopping and throwing a prop. Says run it in on a 13x6 prop but can go up to a 16x6. Thanks for the weight guide Denis. John M
×
×
  • Create New...