Mick Baker

Just read the article in RCM and E July edition re the concord one model, on pade 31 there is reference to a throttle ESC mixer that uses diodes which permits all the bec's to be used without shorts etc, can anyone point me in the direction of the circuit diagram/veroboard cuts. Cheers, Mick

Alec James, PM sent

Posted by chris Bond - Bondaero on 10/06/2017 07:14:02: I have a Master 61 rear Needs a clean but very little running if of interest £50 posted I'm not familiar with Master, do you have any pics?

thanks for your help guys, been looking on fleabay, the the mvvs looks a possible option....

I am currently restoring a Hanno Pretner Magic, having owned the fuselage for around 30 years I thought its about time it went into the air, my problem, it ideally needs a rear exhaust .61 engine, 30 years ago I couldnt afford one, now I can afford one I cant find one, can someone point me in the right direction, new or secondhand....

Biggles, brilliant idea, I am fortunate in owning a lathe so I can develop the idea slightly and make back plates with mounting lugs in one piece. Talk about brain fade.......I had a serious dose. Thanks once again Biggles

Bucksboy, thanks for your response, perhaps I have not made it clear what I mean.......I have the vac formed spinners.......these have to be attached to the backing plates...glued on or similar. what I cant get my head around is how to mount the assembly onto the prop/shaft. Commercial spinners are in two parts, one part is generally bolted on first followed by the second part which is screwed on. One option I have considered is to put a T nut on the inside of the ply backing ring but I dont think this is particularly satisfactory unless someone tells me otherwise.

Can anyone assist on a good way to build and attach vac formed spinners (I need to do the four for my 72" Lanc?

ti's but a free draw therefore I want a part of it.