Jump to content

ASH.

Members
  • Posts

    355
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ASH.'s Achievements

2

Reputation

  1. Nick, look out for an SH (South Herts) twin intelligent onboard glow.. Both plugs will stay lit so no chance of flameout.. Plus, it only comes on when it detects low plug voltage ie. when cold fuel comes in on an aboarded landing.
  2. Hangar 9 pro-lite wheels are low bounce and much lighter than Dubro. I think these wheels have an inner foam core. The Slec / Radio Active wheels are good too.
  3. Maxlock connectors seem like a good solution, but, does it require cutting the plug off servo lead and crimping ?
  4. The PZ Wildcat is a lovely little flyer.. The thin plastic cowl cracks easily so best to reinforce with F/G inside.
  5. I have the same problem.. cannot view.. No withdrawals but would like to have access same as everyone else..!
  6. Yes, it's the Rx battery voltage using LiFe. The audio warning came on - "low battery" and straight after it crashed. Rx battery was showing 6.4V so I presume it 'fell off the cliff'. Should the alarm be set at 6.5V ? Or, is anything below 6.6 in danger territory.
  7. A club member's model crashed due to total loss of control due to Rx battery. He was using a small 2s LiFe and had not charged it since previous flying session. The Rx voltage showed 6.4V on Tx. So, my question is - What is the lowest voltage one should go down to with a LiFe to be safe?
  8. The Pup looks lovely in the air.. Nice pics!
  9. Timing is important in a stall turn. Use the momentum on the upline just before the model comes to a complete stand still. It also matters which way you turn.
  10. I had problems logging on to RCM&E to view magazines. I had to request a new password because they are two different sites. I use Firefox on my laptop and it works perfectly.
  11. Amazing build Tim.. coming along in leaps and bound! Never knew a Spitfire build would require hand stitching, except maybe perhaps the pilot's attire. Good flying tomorrow chaps.
  12. It's the Subscriber ID I need.. to crack the code. Can one of the mod's advise. Thanks David, will that mean changing the password on the Forums site?
  13. I have tried that but keep getting.. Sorry, unrecognized username or password. Have you forgotten your password?
  14. I have a problem.. I cannot log into the RCM&E Main page. I am trying to open a new account with same password but do not know my Subscriber ID. Can someone help please.
×
×
  • Create New...