Kevin Fairgrieve

When will mine be ready then @Ron Gray? Merry Christmas!!

Here is one I did a good few years ago. And all the bits to do another one. I had three of these TX back in the day. This is the last of them and my only remaining 35MHz system.

Otto Von Shnorkel. 3D printed many years ago for my Hannibal!! I see the file is no longer on Thingiverse. Glad I downloaded a copy. I fancy a resin printed version to save weight.

And mine behaved much better when going fast. First and only flight so far was on a 4S 2700mAh weighing 315grams. Tail heavy!!!

I do not need much encouragement, and it usually comes from you @Ron Gray 🤣

Same as yours. It does not really need any more. Although I have thought about a 4S setup, the extra weight would probably be to much. Do let us know if you go down that route. I have also used a few 3D printed parts on mine. Battery box, wing tip protectors and equipment bay cover. 2826-2200 25 AMP ESC 6x4 APC prop 2200 3s Mobius camera mounted on the black plate in the nose.

I love my Teksumo. Since rebuilt and flown again. And unlike you I still have a boxed one the bench. Sitting next to its smaller brother the Bonsai. They are a real fun model to fly.

Something like this would be a modern equivalent to what @Peter Jenkins is suggesting. https://www.amazon.co.uk/dp/B0C3RQ2GR6/?coliid=IOBDCJY9AS8UN&colid=2JJYT2O1TTP8C&ref_=list_c_wl_lv_ov_lig_dp_it&th=1

Yep that did not work did it!!! 🤣

All change!!!!

I can hardly wait to get mine flying. My Red will complement your Green.

One race left!!! I am going to change all three teams and drivers. I have 0 to loose.🤣

Oh yes. A vast improvement. Even a good quality filament print does not come close.

I was in need of a wing bolt washer. Had non of the correct size, so I'll just 3D print it. As it is just as quick to print 20 as it is 1, just use a little more resin. Could have squeezed a few more on, but this will do me for a while.

A good place to start would be the Github repository. Github Multi Module.

Mine were also delivered by the RM. I was a little surprised to say the least.

My order has arrived👍

My tracking order is now showing.

I deliberately placed an order for goods that were "in stock" Order placed 28-10-2023 Had notification today 02-11-2023 that the goods have been dispatched. The tracking number is currently not showing though. Good job as the plane I ordered the battery's for is also due to me tomorrow.

My pictures from "The Pilots Ball" are now on my flickr page. The Pilots Ball. A couple from the set.

Well I bit the bullet and placed a small order. All items showing in stock. Lets see.

Many hats.

I do not have a single plane with a Gyro (unless you count the tiny Eachine joby", that is all about to change though. The X-Fly Eagle that I have on pre order has one, but I suspect that it will soon come out. I have 3 or 4 FrSky S6R S8R that were initially used and then had stabilization switched off. Same for EXPO, only recently have I started to experiment with it. Many people in the club use them and why not, they are just not for me.

I have also used Engel in Germany for some FrSky stuff. They can also do the activation codes. Engel Modellbau Don't forget to use Google translate or click the Union Jack.

Tibenham 29-09-2023 Click to see the pics..