brfc7
Members-
Posts
560 -
Joined
-
Last visited
brfc7's Achievements
1
Reputation
-
Evening Pat, I had to cut about 2.5mm off the root of the blades to fit in to the existing hub but had two flight this evening as the sun set and she flew great ?????? I owe you a pint. baz
-
Thanks Pat, just seen my little present. did you have a fly while you were at field. baz
-
I wouldn’t mind trying the Graupner ones Pat. Not sure if I’ll get today but if you do have time to drop them off at hut you could stick them in a bag with a piece of paper in with name written on and pin to notice board. Get yourself a fly while there as already 4-5 at field. baz
-
Roughly measured the total prop assembly is 7” so as a sports model it’s probably running a 7x5 or 7x6. a single blade from tip to mounting is 3” Baz
-
Managed to break one of the folding prop blades on my HobbyKing Super Kinetic while putting it away (Doh) Had a look on HK website and a pack of blades is discontinued but you can get the whole prop assembly but only from global warehouse. Thought about using a different prop but there isn't any markings on either blade to say what size/pitch they are. Anyone got any information please or even have a spare blade I could buy???? Cheers Baz
-
Autumn is here...you been flying ?
brfc7 replied to john stones 1 - Moderator's topic in Flying Field Reports and Chat
Just two of us braved the conditions in Northumberland on Monday morning, both with 600 size helicopters. 0 degrees but with no wind at all you could actually feel the warmth from the sun the odd time it appeared from behind the clouds. Baz -
ken anderson. started following brfc7
-
brfc7 joined the community
-
Advent Prize Draw - 23rd Dec
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
please -
Advent Prize Draw - 16th Dec
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
hi -
Advent Prize Draw - 12th Dec
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
please -
Advent Prize Draw - 11th Dec
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
hi -
Advent Prize Draw - 4th Dec (post to enter)
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
Hello brfc7 -
Advent Prize Draw - 3rd Dec (post to enter)
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
Yes please BRFC7 -
Advent Prize Draw - 2nd Dec (now closed)
brfc7 replied to David Ashby - Moderator's topic in All Things Model Flying
Handy BRFC7 -
Ken also the American flag PC that I bought off you didn’t last too long as I didn’t close top hatch properly and it came off just after launching and went straight through prop resulting in mid air explosion 😂 Still have my PC Mk2 baz