Jump to content
Please be aware of scammers when using the Sale/Wanted forum areas

brfc7

Members
 View Profile  See their activity

  • Posts

    560

  • Joined

  • Last visited

 Content Type 

Everything posted by brfc7

  1. brfc7
    Evening Pat, I had to cut about 2.5mm off the root of the blades to fit in to the existing hub but had two flight this evening as the sun set and she flew great ?????? I owe you a pint. baz
  2. brfc7
    Thanks Pat, just seen my little present. did you have a fly while you were at field. baz
  3. brfc7
    I wouldn’t mind trying the Graupner ones Pat. Not sure if I’ll get today but if you do have time to drop them off at hut you could stick them in a bag with a piece of paper in with name written on and pin to notice board. Get yourself a fly while there as already 4-5 at field. baz
  4. brfc7
    Roughly measured the total prop assembly is 7” so as a sports model it’s probably running a 7x5 or 7x6. a single blade from tip to mounting is 3” Baz
  5. brfc7
  6. brfc7
    Managed to break one of the folding prop blades on my HobbyKing Super Kinetic while putting it away (Doh) Had a look on HK website and a pack of blades is discontinued but you can get the whole prop assembly but only from global warehouse. Thought about using a different prop but there isn't any markings on either blade to say what size/pitch they are. Anyone got any information please or even have a spare blade I could buy???? Cheers Baz
  7. brfc7
    Just two of us braved the conditions in Northumberland on Monday morning, both with 600 size helicopters. 0 degrees but with no wind at all you could actually feel the warmth from the sun the odd time it appeared from behind the clouds. Baz
  8. brfc7
    please
  9. brfc7
    hi
  10. brfc7
    please
  11. brfc7
    hi
  12. brfc7
    Hello brfc7
  13. brfc7
    Yes please BRFC7
  14. brfc7
    Handy BRFC7
  15. brfc7
    Ken also the American flag PC that I bought off you didn’t last too long as I didn’t close top hatch properly and it came off just after launching and went straight through prop resulting in mid air explosion 😂 Still have my PC Mk2 baz
  16. brfc7
    I had looked at a ripmax one but motor mount was different and it didn’t have the holes in wings to throw it. Must have changed the design. baz
  17. brfc7
    The wing has two rectangle holes all the way through near the centre, I’m guessing to hold model as throwing it.
  18. brfc7
    Can anyone help me identify which company made this Mustang? Any details on motor too? Wingspan - 47” length - 40” Motor - HiModel Width -35.4mm, back of motor to start of shaft - 34mm, Shaft 5mm
  19. brfc7

    brfc7 posted a gallery image in Member Albums

  20. brfc7

    brfc7 posted a gallery image in Member Albums

  21. brfc7
    Watching with interest Baz
  22. brfc7

    Futaba R3106GF

    brfc7 posted a topic in Futaba

    Has anyone got actual flight experience with the Futaba R3106GF? I’m reading conflicting descriptions online where a couple of shops describe this receiver as a park fly most don’t have anything in description. Got 2 and never thought about it until seen they only have 1 aerial. Wanting to use them in 50size models with full range. thanks in advance. baz
  23. brfc7
    To show the size difference, here's my finished Micro and part built Mini. The rear of wing is lined up with one another. Baz
  24. brfc7

    brfc7 posted a gallery image in Member Albums

  25. brfc7
    Since I completed my Micro Blitz a few days ago and haven’t managed to maiden it yet I thought I’d get straight on with building the Mini Blitz too The build will be the same as the Micro using an extra rib to sandwich the fins in between. Next time I build either of these models I’m just going to make solid sheet wings as will save a lot of hassle and with brushless motors the extra weight will be cancelled out with loads of POWER Baz
×
×
  • Create New...