andy watson
Members-
Posts
1,948 -
Joined
-
Last visited
Never
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
andy watson's Achievements
0
Reputation
-
andy watson joined the community
-
Anyone for a Tiffie?
andy watson replied to Biggles' Elder Brother - Moderator's topic in Build Blogs and Kit Reviews
Sorry for being tardy on this, but there is a solution to the wiring that no one has mentioned- Ashlock connectors. Available from Fighter aces: **LINK** I have used these where the amount of toys in the wings has led to a mass of cables needing to be connected into the fuselage (or vice versa). These are fantastic little devices- no soldering- which in my book is a very good thing, but also total security of the connection with a mechanical lock of the 2 halves- so no danger of vibrations coming loose. I know that doesn't help you BEB, but as we know- these blogs are really for the people following! -
The Quest, no not the Holy Grail, been done
andy watson replied to Danny Fenton's topic in Scale Matters
I have never bothered looking anywhere other than flightline Danny. He does get very busy, so his lead times can stretch a bit, but Nigel is brilliant. Don't phone him unless you have an hour to kill talking about your model- he is the only person I know that gets as excited about your build as you do yourself! Can't recommend him highly enough. -
Hand painting detail
andy watson replied to Dylan Reynolds LaserCraft Services's topic in Hints and Tips
I would give maskol a go then- it's about the best idea I can come up with -
Dismantling your OS electric motor? Don't!
andy watson replied to Joe Beavis's topic in General Electric Flight Chat
At least we now know what happens when electric fliers run out of IC fliers to argue with! -
Hand painting detail
andy watson replied to Dylan Reynolds LaserCraft Services's topic in Hints and Tips
Dylan, Here's my problem with what you are describing- I can't see any way the paint can be bleeding under the tape!! Tamiya tape is pretty good stuff- especially on a smooth surface. I could understand more if you were working on solartex or another fabric textured covering, but I would guess not. Then you have sealed the tape with white (the base colour), again excellent practise. Finally if you are dry brushing then I can't see there is enough paint to wick under the tape anyway (which is what happens when the paint bleeds through)- especially if you are brushing away from the tape. If anything I would have expected to see a small gap between the tape and paint. But............maybe..... and it's probably a long shot......... you say you have thinned the black coat. If it has been thinned really thin could it manage to get through? Especially along panel lines etc? I am just thinking that heavily thinned black paint is sometimes used as a wash/weathering technique which can get into every nook and cranny of a model? My only suggestion is try painting the black on unthinned to maintain its thickness and so reduce its likelihood to be pulled along by capillary action.. -
Hand painting detail
andy watson replied to Dylan Reynolds LaserCraft Services's topic in Hints and Tips
I have a bottle in the workshop that I have never tried either! I would imagine (and the reason I bought it) that it would be much better on a textured covering like solartex than a tape which will always struggle to get into the dimples of the fabric and prevent bleeding. The latex like structure once its dried should come off cleanly- but as I said above- I haven't actually used it -
Hand painting detail
andy watson replied to Dylan Reynolds LaserCraft Services's topic in Hints and Tips
The OP seems to have done everything most of us do, and is still struggling. I would advise trying a product called maskol. It's a liquid masking agent and so shouldn't allow any bleeding. -
World of tanks is a pretty good game- I have racked up close to 3k battles on there.......... I wonder what I could have achieved if I had spent that time productively!! It also links into their new (and less well known) game called world of warplanes- which would obviously be more down the avenues of interest for many on here- maybe we should get an RCM&E clan going!
-
How about this for service....
andy watson replied to Rich too's topic in R/C Retailers / Distributors / Manufacturers
I had a similar experience with Airtek. I had bought a charger, which went pop on turning on. I gave them a ring expecting them to ask me to send it back, some time for them to evaluate it, and them to post out a replacement to me. The end result would have been I couldn't get everything charged for the weekends flying. Not a bit of it- the replacement was in the post the same day and I returned the faulty one at my leisure. Excellent service I still remember and tell people about........... like now! -
Where have all the GOOD trainers gone?
andy watson replied to Peter Christy's topic in All Things Model Flying
An often ignored little trainer I like is the jumper 25. Struggles to get off grass with the recommended 25, but put a 40 into it and it's a great little plane. Slightly smaller than the similar liiking arising star- but cheaper as well. -
Our science club are busy putting together 10 indoor fliers, and so will be busy for a while, but I am thinking about their next project. I remember seeing a number of programmes where various people have bought weather balloons, filled them with Helium and released them. These balloons will rise rapidly to the edge of space, but also show wind conditions on the way up. They eventually burst and fall back to Earth many miles away. My idea.........and as usual I am miles out of my comfort zone here- is to do this, but the balloon (as per the TV) is carrying a box containing a camera and GPS tracking- allowing us to follow the balloon and retrieve the box. Ideally I would like the balloon to transmit live video feed and GPS data back so we can all watch it as it happens. The alternative would be that we get the video once we retrieve the box. The obvious worry is what if we lose the box- and hence the camera. Extra sensors such as temperature would be interesting too. Has anyone any experience of doing something like this, or the kind of equipment that would be suitable? Budget isn't as tight as you might expect for a school project- but if we could get everything back it would help!!