Mike T Posted August 11, 2021 Share Posted August 11, 2021 Picking up on your comments about Sandvik in the Permagrit thread, I use the spare plates to make some bespoke rifflers - now down to my last one. The more expensive (but good and available) Permagrit equivalent could also be used. Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted December 4, 2022 Share Posted December 4, 2022 Pin guide. After hurting my thumbs and bending pins I decided to make myself a pin guide from some thin brass tube and steel wire that is a snug fit. I know you can get T pins and pins with plastic heads but I find some of those pins are too thick and leave big holes . So this is for those thin pins . You will need to check for a good fit of the pins. Steve. Quote Link to comment Share on other sites More sharing options...
Trevor Posted December 4, 2022 Share Posted December 4, 2022 My dad used to have a bigger version of this. We called it a Panel Pin Pusher. No idea if that’s what it was really called! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.