ross blackwell Posted August 13, 2014 Share Posted August 13, 2014 Hey guys,&(gals)has any-one purchased a 2.4Ghz Turnigy TGY 9X radio recently?I have just brecieved mine & it will bind with rx but plugging servos into the rx & nothing works? The Tx has a module fitted already but I suspect the Tx has to be "activated" Any suggestions? Quote Link to comment Share on other sites More sharing options...
Chris Barlow Posted August 14, 2014 Share Posted August 14, 2014 What module and receiver are you using? If you've got a telemetry rx the switches on the back of some modules need to be set accordingly. Likewise if your rx is not a telemetry rx then the switches also need to be set correctly. Quote Link to comment Share on other sites More sharing options...
ross blackwell Posted August 15, 2014 Share Posted August 15, 2014 Thanks for that Chris,I may have partially self remidied as when I did the initial bind I was using a 4.7nicad batt. to try it out:I have since hooked up an 11.4 lipo via an esc & servos work on 5 channels. As I'm not really up with using Tx that require lots of "button pressing" to establish various set-ups it may take me a while to "tell the Tx" that I fly with mode 2 & I may need to be able to use one of the "switches" to operate flaps or similar.I have found a web-site from which I have printed a few pages but following the "jargon" is a bit difficult for some of us not familiar with the digital age. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.