Bob Moore Posted March 26, 2011 Share Posted March 26, 2011 For a bit of fun I velcroed one of my 808's on my Giant Cod Depron Edge. (£14 from GC.) A very lightweight foam model. A lot of vibration (from the prop I suspect,) but quite fun. Reminded me of the Red Bull Extra Speed Runs. It gives a good impression of speed. Then I stuck it on my Westwings electric Orion. It makes a much more stable platform. First time I've used a looking aft view and I like it. Nowhere near as good as my new HD key chain cams , but less than a tenner as opposed to £25. So I don't mind risking one of these on a model. PS This 808 has the wide jelly lense glued on to it. Edited By Bob Moore on 26/03/2011 14:33:15Edited By Bob Moore on 26/03/2011 14:34:20Edited By Bob Moore on 26/03/2011 14:35:26 Quote Link to comment Share on other sites More sharing options...
Simon Chaddock Posted April 8, 2011 Share Posted April 8, 2011 Nice videos. Good to see you included the landings! On both of them as you were walking up to the plane at the end it is somewhat speeded up. Was this done specifically or in fact is all the playback like this? Quote Link to comment Share on other sites More sharing options...
Tom Wright 2 Posted April 8, 2011 Share Posted April 8, 2011 The rear facing cam looked good ,Bob what a brilliant flying site you have! . TW2. Quote Link to comment Share on other sites More sharing options...
Bob Moore Posted April 9, 2011 Author Share Posted April 9, 2011 On both of them as you were walking up to the plane at the end it is somewhat speeded up. Was this done specifically or in fact is all the playback like this? It was done for effect in the editing. I like it anyway! It was the first time I've tried rear facing cam. It's nice to see the control surfaces moving. Edited By Bob Moore on 09/04/2011 17:38:50 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.