Depron Daz Posted March 24, 2016 Share Posted March 24, 2016 I cannot wait to start on it John, which will be this weekend, but as I have to order in the motor I will have to start on the wing and tail first. Would I be right in thinking (haven't checked, just come to mind) that a WOT-4 motor would be of similar size? I'll have to check, get back to you in a minute! Quote Link to comment Share on other sites More sharing options...
John A H Posted July 31, 2016 Share Posted July 31, 2016 Some flying shots of our Dawn Flyer. Not had any problems with tip stalling at slow speed, we have steamed washout into the ailerons. Also added a bit more dihedral to the wings - models often look like they have anhedral if they are setup with only a small amount of dihedral. It flys very nicely and looks best cruising around with gentle loops but is capable of rolls, inverted and knife edge aerobatics. Quote Link to comment Share on other sites More sharing options...
Lindsay Todd Posted July 31, 2016 Share Posted July 31, 2016 Looks superb. glad you like her. Lindsay Quote Link to comment Share on other sites More sharing options...
John A H Posted August 2, 2016 Share Posted August 2, 2016 Thanks Lindsay. As we fly off a tarmac runway it can be a bit "skittish" on the ground - the wire outriggers under the wing tips have proved very effective at protecting them if it attempt to ground loop. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.