Nev Posted March 31, 2015 Share Posted March 31, 2015 There are a lot of finishing off jobs on this one, I've been doing a few as I go, it slows you down but you get there. At the moment I'm having a bit of a break from building and have been trying to fashion some wing tip lights. Wait till you start doing that stuff, then you'll wonder where the time goes. Fun though but I'm not at Martyn's level. Keep the mojo flowing. Nev. Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 3, 2015 Author Share Posted April 3, 2015 Just a bit to show i'm working on it , t/plane glued on I used the tabs to get incidence and level. once dry I can glue up elevator to wire joiner John Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 3, 2015 Author Share Posted April 3, 2015 Torque rod can be finished when fin is glued on and used the sheeted area for flap servo position John Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 7, 2015 Author Share Posted April 7, 2015 Ready for gluing up control rod for the rudder, did a bit of fine tuning to pushrods in fuzz to get a good smooth run, once this bits done I can glue the fuzz up John Quote Link to comment Share on other sites More sharing options...
Colin Leighfield Posted April 7, 2015 Share Posted April 7, 2015 You come across as being somewhat tidier and better organised than me John, both in your working area and build! I really must sort myself out. (Been telling myself that since 1957)! Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 7, 2015 Author Share Posted April 7, 2015 No mate hence the close up John Quote Link to comment Share on other sites More sharing options...
Tony Bennett Posted April 7, 2015 Share Posted April 7, 2015 you dont want to see my work area then. Quote Link to comment Share on other sites More sharing options...
Nigel Day Posted April 8, 2015 Share Posted April 8, 2015 Looking very smart John. Looking forward to the fun joining the fuse halves? Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 3, 2021 Author Share Posted April 3, 2021 Well I moved the Chippie on and he finished it (Chaz Boddy, club mate). Made a better job of finishing it than I would have. ? Tiggie in background Laser 150 powered. 4 Quote Link to comment Share on other sites More sharing options...
Danny Fenton Posted September 27, 2021 Share Posted September 27, 2021 (edited) Great to see the Chippy's gradually getting finished ? Still would be nice to get them all together someday. I have been asked by an aeromodeller if there are any part built ones languishing on a shelf looking for TLC, drop me a note if you know of one. Cheers Danny Edited September 27, 2021 by Danny Fenton Quote Link to comment Share on other sites More sharing options...
Kevin Fairgrieve Posted September 28, 2021 Share Posted September 28, 2021 Mine has stalled and will probably not be finished. Wing built, Plan cowl and canopy all there. all the rest of the laser cut parts are there. Located in Norfolk. Make me an offer!! 1 Quote Link to comment Share on other sites More sharing options...
Danny Fenton Posted September 28, 2021 Share Posted September 28, 2021 Thanks Kev, I will pass a link to this thread to my friend. Cheers Danny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.