bert baker Posted January 9, 2016 Author Share Posted January 9, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 9, 2016 Author Share Posted January 9, 2016 Starting to work out the control cable runs, then I hope to be able to start the covering..... The Tail feathers are all Spilt pin hinged, it has worked out much better than I thought it would be. I have made the tail plane removable. The dash is the Mick Reeves 1/3 scale dash kit, Quote Link to comment Share on other sites More sharing options...
Kevin Fairgrieve Posted January 9, 2016 Share Posted January 9, 2016 Posted by bert baker on 09/01/2016 11:30:02: I have made the tail plane removable. Have you got any picture`s of how you did that Bert? Looking at the MR dash myself. Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 9, 2016 Author Share Posted January 9, 2016 Hi Kevin I will sort out a picture. I have just used four bolts and blind nuts on the top of the tail plane. nothing exiting there, the rear post is supported in a bit of old radio aerial mounted on a bracket screw into the bottom of the fuz. Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 9, 2016 Author Share Posted January 9, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 9, 2016 Author Share Posted January 9, 2016 Quite pleased with the split pin hinges Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted January 9, 2016 Share Posted January 9, 2016 Hinging looks good Bert John Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 10, 2016 Author Share Posted January 10, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 10, 2016 Author Share Posted January 10, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 10, 2016 Author Share Posted January 10, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 10, 2016 Author Share Posted January 10, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 10, 2016 Author Share Posted January 10, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 24, 2016 Author Share Posted January 24, 2016 I was thinking about the seat,, a quick search was done and found a comment that no two seats were the same,,,,, so I made my own design Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 25, 2016 Author Share Posted January 25, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 25, 2016 Author Share Posted January 25, 2016 Quote Link to comment Share on other sites More sharing options...
bert baker Posted January 25, 2016 Author Share Posted January 25, 2016 Carrying on with the split pin theme, I an going to use these small shackles and split pins, forget nuts and bolts just a good stock of split pins. Edited By bert baker on 25/01/2016 17:37:37 Quote Link to comment Share on other sites More sharing options...
bert baker Posted February 7, 2022 Author Share Posted February 7, 2022 3 Quote Link to comment Share on other sites More sharing options...
bert baker Posted February 7, 2022 Author Share Posted February 7, 2022 3 Quote Link to comment Share on other sites More sharing options...
bert baker Posted February 7, 2022 Author Share Posted February 7, 2022 More or less there a few rigging bits to redo as not happy with them Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted February 7, 2022 Share Posted February 7, 2022 Looking great - well worth all the effort! Quote Link to comment Share on other sites More sharing options...
Alan Hilton Posted February 7, 2022 Share Posted February 7, 2022 Looking very nice well done What engine ? Quote Link to comment Share on other sites More sharing options...
Basil Posted February 8, 2022 Share Posted February 8, 2022 18 hours ago, bert baker said: WOW!!!!!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
bert baker Posted March 12, 2022 Author Share Posted March 12, 2022 On 07/02/2022 at 17:32, Alan Hilton said: Looking very nice well done What engine ? Many thanks It’s got the Zenoah G38 with reduction drive Quote Link to comment Share on other sites More sharing options...
bert baker Posted March 12, 2022 Author Share Posted March 12, 2022 Quote Link to comment Share on other sites More sharing options...
bert baker Posted March 12, 2022 Author Share Posted March 12, 2022 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.