Jump to content

John's Ballerina Build


Recommended Posts

Mine will be lecky, and as I already have some gubbins at hand i'll be using them.

here's what I have SK3 3548 1050kv ..60amp Plush esc...3300 mah lipo prop we'll decide on later with ground clearance and wattmeter.

So that's my set up, I'm sure there'll be quite a few different ones and they'll all be O.K

John

Link to comment
Share on other sites

I will be using a built up tail as well - but different again..

One point, I have folded 2 tail-planes in the past couple of years (in flight). I would be inclined to add a 1/16" ply brace about 8" long butted against the TE (inside edge) if you can get it in without hacking it to much

Nice work John

Martyn

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...