Andy Meade Posted March 28, 2019 Share Posted March 28, 2019 A lovely spot that Al, I fancy a big T-Bolt one day for sure Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted March 28, 2019 Share Posted March 28, 2019 Not going to make any jug-based pun here! Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted June 10, 2019 Share Posted June 10, 2019 My VQ models SBD is for sale. Comes with all servos (6 off) and electronic bomb release (and bomb of course), no battery or receiver. Flies very well in anything from 18 up to 60mph winds, imho a bit more stable than the Hurri, and will fly in lighter winds. Has a 3d printed engine and lots of weathering, outer dive brakes work lovely. Cab take to Weston Park (am there all weekend) £80 Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted June 10, 2019 Share Posted June 10, 2019 SBD now sold! Quote Link to comment Share on other sites More sharing options...
Christopher Osborn Posted June 22, 2019 Share Posted June 22, 2019 Looking for my first PSS. Really wanted something in EPP for obvious reasons! Has anyone got something they wish to sell? Otherwise was thinking of getting one from Leading Edge Gliders. Has anyone experience of these kits? Any help would be much appreciated. (Have got many years experience of powered planes). Quote Link to comment Share on other sites More sharing options...
Phil May Posted June 22, 2019 Share Posted June 22, 2019 I've an old leading edge glider Mustang that is in a sory state that needs a total overhall that you can have for the price of postage if interested. Edited By Phil May on 22/06/2019 21:06:50 Quote Link to comment Share on other sites More sharing options...
Christopher Osborn Posted June 23, 2019 Share Posted June 23, 2019 Thanks for the offer Phil. Will message you. Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted August 6, 2019 Share Posted August 6, 2019 A few models for sale, and others coming up in the near future too I think. Firstly, a HET Dassault Rafale converted to PSS by me, weighs just over 2lb. I think the C of G is spot on now, so I'll leave the 1800mAh LiFe battery in (and servos) as it is fairly far back inside. £70. A Mirage F2000. This is an unfinished project with a glass fuselage, foam wings (sheeting needs finishing), canopy, fin and tailpipe. Needs a nose block adding and shaping as seen. £40. From the same image above, a glass fuselage, cowl and canopy try (but no canopy) from a YT / ESM Skyraider A1. Quite a light moulding, and I've drawn the wing up for this if you want it, but no wing included. £40. An Aerotetris F4 Phantom (2250 version). This is un-built and still in it's shipping box. A good saving over new. £100. (pic shows finished model size and shape of course) Cash on collection from near Evesham, but can meet up if required and not too far. Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted August 6, 2019 Share Posted August 6, 2019 Skyraider fuselage now sold Quote Link to comment Share on other sites More sharing options...
Phil May Posted August 6, 2019 Share Posted August 6, 2019 Maybe a certian little ME 262 ???? 😁😁😁 Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted August 6, 2019 Share Posted August 6, 2019 She's not in a flyable state I'm afraid Phil, the engines keep wrecking the wing when it lands. Ideally needs a new wing cutting, and the engines attaching with magnets Edit to add - F4 kit now sold Edited By Andy Meade on 06/08/2019 12:25:30 Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted September 11, 2019 Share Posted September 11, 2019 Here's an untouched Flair Lightning kit on the BMFA classifieds: **LINK** I'd be tempted myself but there's the mass-build Sabre and about 25 other models in the the queue. I've bought from the seller Andy Exton before. Nice chap! Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted October 17, 2019 Share Posted October 17, 2019 A virgin MB339 kit from Island Models here on the BMFA classifieds Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted February 26, 2020 Share Posted February 26, 2020 Set of EDF F-18 Hornet moulds for sale on the BMFA classifieds. Might make a good PSS project for someone keen to turn out a few sets of mouldings? We could have a Hornet Squadron at PSSA events... **LINK** Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted February 26, 2020 Share Posted February 26, 2020 Very nice that, well spotted. Quite small though! Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted February 26, 2020 Share Posted February 26, 2020 Small but perfectly formed? Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted February 26, 2020 Share Posted February 26, 2020 Such a charmer Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted June 2, 2020 Share Posted June 2, 2020 What looks to be an IC/DF A4 Skyhawk (possibly the old Jet Hangar Hobbies model) for sale on Fbook BMFA North Classified & Chat for not much money..... Could be a conversion candidate? It is located not too far from me, so I'd be prepared to collect and bring to the next PSSA meet - whenever that is - if it helps anyone? Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted September 9, 2020 Share Posted September 9, 2020 For sale - DH Comet. Includes 4 servos and switch, and a reliable balance point (more than what I had when I bought it! Flies well, but must be kept moving. A real spectacle in the air. 3 piece wing so breaks down well for transport, ABS fuselage, battery hatch for easy access. £90 collection from South Warwickshire, or can take to next PSS meet if our governmental overlords allow it. (thanks to Phil Cooke for the photos) Quote Link to comment Share on other sites More sharing options...
Andy Meade Posted September 9, 2020 Share Posted September 9, 2020 Comet sold Quote Link to comment Share on other sites More sharing options...
martin collins 1 Posted October 19, 2022 Share Posted October 19, 2022 Westfield Model Company F-86A Sabre fun scale model of the post WW2 Fighter. `Quick build containing: Precut balsa and ply parts, moulded canopy, accessory pack, full scale plan and comprehensive instructions.` Wingspan 41", engine .20 to .32 2 stroke OR PSS. Model was designed by Tony Nijhuis. £75 Will post using Parcelforce 48 hr for £10 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.