Jump to content

header pipe


John Lucas 4
 Share

Recommended Posts

Hi John, from memory I have a figure of about 14 inches from the piston centreline to the cone on the pipe however this will depend on individual motor, prop and fuel being used so some experimentation will be required by starting with a longer section of connecting silicon tube and reducing the length say 1/4 inch at a time whilst checking for peak rpm and throttle response. hope that helps. Lindsay

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...