Keith Berriman Posted June 7, 2019 Share Posted June 7, 2019 Just done a deal with a flying buddy and have a Chris Foss Acro Wot ( kit build ) on the bench. All covered an ready for engine and servos etc just need to find the c of g settings . Any body got a plan they could look at also maybe a start point for elevator, airelons movement's please Edited By RC Plane Flyer on 07/06/2019 06:47:11 Quote Link to comment Share on other sites More sharing options...
Keith Berriman Posted June 17, 2019 Author Share Posted June 17, 2019 Bump Update My local Model Shop let me look at the build instructions and make notes Quote Link to comment Share on other sites More sharing options...
conrad taggart Posted February 8, 2022 Share Posted February 8, 2022 Please and they were ? In the same position Quote Link to comment Share on other sites More sharing options...
conrad taggart Posted February 8, 2022 Share Posted February 8, 2022 Think I found the c of g after searching through and reading a fair lot of posts "David, again from the manual - CofG 3 1/4" plus or minus 1/4" back from wing dowel plate/former No. 7." Original thread Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.