Jump to content

ARTF SU27 Conversion to Slope


Flyer
 Share

Recommended Posts

3D Printed Jet Exhausts1.jpgLast year I acquired a part complete Vmar SU27 Flanker. The intention is to PSS it. There were several bits missing, so I've managed to get my lad to design and print the exhausts. I have had to make the air brake, and I am unsure yet whether to mould one in the same way that Dirk made his F86 ones.

Anyway, here's a taster.

front seat passenger (2).jpg

Cheers

Ade

Link to comment
Share on other sites

It's 1.46m wingspan and 1.7m long. Quoted weight for power is under 5kg. I am expecting somewhere around 3kg, and the wing area is huge. Hopefully it will be in the 'mid wind range'.

It is covered with that pre printed oracolor type film, which I will consider spraying once I have test flown it. If it flies well, I may spend a bit more time on it.

Cheers

Ade

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...