Zflyer Posted March 1, 2021 Share Posted March 1, 2021 Have finally got around to fitting spektrum rx to this model which as the Reflex Gyro on board. The manual says to plug the servo leads into the channels as indicated. That was fun control surfaces all over the place. Eventually I just plugged them into the conventional channels on the rx and lo it works. Anyone else have this problem or just me? Quote Link to comment Share on other sites More sharing options...
Brian Lambert Posted March 1, 2021 Share Posted March 1, 2021 Spektrum transmitter? Quote Link to comment Share on other sites More sharing options...
Zflyer Posted March 2, 2021 Author Share Posted March 2, 2021 Indeed. I havent changed the channel assignment on the tx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.