Upkeep Posted March 6, 2021 Share Posted March 6, 2021 I printed this a while ago on an Ender 3. Its a big print but great finished results Files found on thingivers.com ? Quote Link to comment Share on other sites More sharing options...
Upkeep Posted March 6, 2021 Author Share Posted March 6, 2021 I was so chuffed with it, I made another one ? 1 Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted March 6, 2021 Share Posted March 6, 2021 Very impressive, what printer are you using? Quote Link to comment Share on other sites More sharing options...
Piers Bowlan Posted March 6, 2021 Share Posted March 6, 2021 That is truly amazing Upkeep, I didn't realise 3D printing could print parts this accurately. What is its overall length, difficult to get an idea of size from the photos. He said it is an Ender 3 in his OP, Frank. Quote Link to comment Share on other sites More sharing options...
Upkeep Posted March 6, 2021 Author Share Posted March 6, 2021 (edited) Its just shy of 16" long. The fan is 7" in diameter and with the cowl the engine is around 8" dia. Yes, all printed on the Ender 3. Its my first and only 3d printer and I found it easy to set up and after 'dialling it in' it does print very accurately. I was surprised at the quality it produced for cheap machine ! The files for this machine come in a couple of versions so if you have smaller bed then some of the parts are split so you can fit them on. The main fan for eg wont fit on my bed in one go so the chap who supplied the files has the fan split into 3 sections. The same goes for the engine cowling. I added a small motor too ? Clip below. Edited March 6, 2021 by Upkeep Quote Link to comment Share on other sites More sharing options...
Upkeep Posted March 6, 2021 Author Share Posted March 6, 2021 1 1 Quote Link to comment Share on other sites More sharing options...
FlyinFlynn Posted March 6, 2021 Share Posted March 6, 2021 (edited) Excellent......it puts my 5 cylinder cut away rotary engine to shame......it needs a sound module next! Edited March 6, 2021 by FlyinFlynn Quote Link to comment Share on other sites More sharing options...
Upkeep Posted March 6, 2021 Author Share Posted March 6, 2021 oops, sorry. just noticed a shows us your prints thread. Maybe admin can shift it if needed. 1 Quote Link to comment Share on other sites More sharing options...
Martian Posted March 10, 2021 Share Posted March 10, 2021 This is Simply excellent Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted March 10, 2021 Share Posted March 10, 2021 On 06/03/2021 at 12:09, Upkeep said: oops, sorry. just noticed a shows us your prints thread. Maybe admin can shift it if needed. In correct section Upkeep, and worthy of it's own thread, I reckon. Quote Link to comment Share on other sites More sharing options...
Nigel R Posted March 11, 2021 Share Posted March 11, 2021 looks fab ? any ideas whether it is based on a particular full size example? Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.7af3131dd340bdf1c2835b0415b41ff8.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.