Geoff Daunt Posted May 3, 2021 Share Posted May 3, 2021 Why can l not get my Rx to flash so l can bind. I bought this many months ago but just got it out of box. I have plugged in the 2 Satelite rx’s into Ant r & Ant b. Ant L is blank. I have put the binding plug into the correct port and then plugged in a Overlander 2000 Nimh battery, reading 5.37v. Nothing happens. I have then tried via the Esc. servo lead plugged into Throttle port and then connected to new 4s 3700 battery. Again nothing happens to the Rx, nothing flashing but the esc did bleep. Am l doing something wrong or have l got a duff Rx.??? Quote Link to comment Share on other sites More sharing options...
Geoff Daunt Posted May 4, 2021 Author Share Posted May 4, 2021 Silly boy. After sleeping on the matter l have found the problem. pictures show the Rx. I had convinced myself that the legends on the top left ie throttle, Ali, Elev, etc, would apply to the top bank of ports since they are adjacent and the ones on the right were for the bottom ports.??, Oh No ..... that would be far too obvious Just to confuse everyone ( no instructions which is which) the ones on the far right are actually for the Top ports and the ones next to the top ports are for the bottom. Happy days. Now bound and sorted Quote Link to comment Share on other sites More sharing options...
Dwain Dibley. Posted May 4, 2021 Share Posted May 4, 2021 (edited) Glad you got it sorted Geoff, being the Anorak that I am, I keep a little Chart of all the different Rx/Brand/Combos within reach of the bench. Very helpful, especially with the 35 Mhz stuff as you can use all sorts of Rx, hitec, futaba, JR, etc, and the ports are not all in the same order. D.D. Edited May 4, 2021 by Dwain Dibley. I'm an idiot Quote Link to comment Share on other sites More sharing options...
Don Fry Posted May 4, 2021 Share Posted May 4, 2021 Glad I’m not the only one who has to look 10 times before I can work out Spektrum port labeling Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.