tigerman Posted June 29, 2021 Share Posted June 29, 2021 We have a new member joined our club and needs a hand to fly .The problem is he has a DX6 and I have a DX6 and want to set up a buddy system between the 2 DX6 No problem because we can connect both DX6 wireless .The problem is the trainee is mode 1 and I am mode 2 .I can not fly on mode 1 and he can not fly on mode 2 .Is there any way I can use my DX6 has the main transmitter on mode 2 and connect to he's DX6 on mode 1 .In other words can one transmitter be on mode 1 and the other on mode 2 .After reading the instruction manual it looks like both transmitters both have to be on mode 1 or both on mode 2 .Am I right you can not have the master transmitter on mode 2 and the slave transmitter on mode 1 ????? Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted June 29, 2021 Share Posted June 29, 2021 The DX6 Master is bound to the model, either Mode 1 or 2 Trainer Bind, in the Master then binds the 2nd DX then uses the 2nd DX sticks only, whether Mode 1 or 2 The Master controls which pilot is in charge by push button This all works so long as the receiver is connected correctly in the order TAER Quote Link to comment Share on other sites More sharing options...
tigerman Posted June 29, 2021 Author Share Posted June 29, 2021 Thanks Denis .I try that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.