Chris Williams Posted June 30, 2021 Share Posted June 30, 2021 A few weeks ago I found myself alone on a slope with just the little Wolf for company. (Pure laziness: the model will sit in a small car, fully rigged and ready to fly) This glider is a lively machine to operate, and I wondered at last, what it would be like in Sedate Mode. (I won't use rates, as I once lost a model rolling it with the rates out & I'm still in therapy). It turned out that those super-large ailerons were mostly the culprit, so I've included the new throws for those that like their excitement in smaller chunks. SEDATE MODE Ailerons: 25mm up, 12mm down Elevator: 20mm up, 14mm down 75% elevator comp Elevator: 20mm up, 15mm down Also, the flying surfaces were re-covered in the new HK matt clear film, with solid colour film as trim. 4 Quote Link to comment Share on other sites More sharing options...
Bob Jennings 1 Posted February 21 Share Posted February 21 Hi Chris, I was inspired to build your little beauty. Here are some photos of mine in the Peak district. 3 Quote Link to comment Share on other sites More sharing options...
Chris Williams Posted March 1 Author Share Posted March 1 Nice work, Bob...👍 Quote Link to comment Share on other sites More sharing options...
Jake Bullit Posted March 1 Share Posted March 1 Currently 3d printing a free download of the Go Wolf. Quote Link to comment Share on other sites More sharing options...
Chris Williams Posted March 2 Author Share Posted March 2 Interesting stuff... Look forward to a flying report Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.