Edgeflyer Posted September 16, 2021 Share Posted September 16, 2021 Hi, I am new to model paint spraying and I have several queries. How do I connect my old Badger 250 spray gun with its tiny air line to my compressor with its 1/8 bsp airline? Secondly what are the best paint types to thin down and spray over doped nylon? I am not sure about water based acrylics for this. Quote Link to comment Share on other sites More sharing options...
Edgeflyer Posted September 16, 2021 Author Share Posted September 16, 2021 Is a syphon fed airbrush better than a gravity feed for larger areas? Finally I need cups for a side feed cheap dual action brush that doesnt have one. I got a cup from China but its the wrong fitting. Mine seems to need a small male threaded screw in Quote Link to comment Share on other sites More sharing options...
Allan Bennett Posted September 16, 2021 Share Posted September 16, 2021 For the bits and pieces for your spray gun I suggest you contact https://www.airbrushes.com/ They were able to supply me an adapter to connect an Iwata compressor and air line to my Paasche airbrush. They sell Badger equipment, so they should be able to fix you up. I went on a one-day beginners' airbrushing course at airbrushes.com, which I found invaluable. Quote Link to comment Share on other sites More sharing options...
Dad_flyer Posted March 28, 2022 Share Posted March 28, 2022 Has anyone used Scale Model Shop? They happen to have all the things I need in stock, otherwise it would be two orders to Everything Airbrush and airbrushes.com... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.