Mick1111 Posted October 12, 2021 Share Posted October 12, 2021 Regarding the evolution models fusion 2, can anyone tell me whether the wing is built as a complete structure or whether it is built in two halves and joined. I am trying to find out what would be the minimum board size to build it. Quote Link to comment Share on other sites More sharing options...
Jonathan M Posted October 13, 2021 Share Posted October 13, 2021 Just ask them directly: http://evolution-models.com/contact-us/ Quote Link to comment Share on other sites More sharing options...
EarlyBird Posted October 13, 2021 Share Posted October 13, 2021 I see it is 52" WS which will include the tips but when on the board these are not added. Looking at the photos on the site the tips could easily be 2" each which means that if built in one piece a 48" board will be needed, I would add a bit to this as I am very cautious. Also a 48" board is a useful size. Of course you could build the two wings separately and join them permanently afterwards. Maybe this is all in the instructions so maybe the best course of action is to contact them, as Jonathan M said. Quote Link to comment Share on other sites More sharing options...
Geoff Copping Posted October 14, 2021 Share Posted October 14, 2021 I have a Fusion II. I built it on a 49" board. As has been said, the tips can be added after building the one piece wing. 48" would be the minimum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.