MikeQ Posted October 17, 2021 Share Posted October 17, 2021 (edited) Hello Any idea where to get white foam, at least 4” thick but preferably 5-6”, for cutting cores these days (without having to buy a transit van full in one go). Or are there any core cutting service out there you guys would recommend? cheers mike Edited October 17, 2021 by MikeQ Quote Link to comment Share on other sites More sharing options...
Alan Hilton Posted October 17, 2021 Share Posted October 17, 2021 Bill Manley of Bill kits makes great foam wings and turtle decks Quote Link to comment Share on other sites More sharing options...
wingcoax Posted October 17, 2021 Share Posted October 17, 2021 3 hours ago, Alan Hilton said: Bill Manley of Bill kits makes great foam wings and turtle decks DITTO Quote Link to comment Share on other sites More sharing options...
kc Posted October 17, 2021 Share Posted October 17, 2021 If you find a source of white foam check before you buy that veneer is available at a reasonable price too........I found that veneer and foam was now so expensive that it would be cheaper/better/easier to build a built up balsa wing! Bill Kits cut foam wings and the website gives an indication of the price - this also made me think that even todays high priced balsa would be a cheaper way of making wings...... Quote Link to comment Share on other sites More sharing options...
MikeQ Posted October 18, 2021 Author Share Posted October 18, 2021 Hello its for a ‘lost foam core’ type build. Could do it built up, especially laser cut, but it’s really the foam D-box, foam jig and built up rear I’m after. cheers mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.