RICHARD WILLS Posted July 1, 2022 Share Posted July 1, 2022 Nice work Ron and thanks for documenting that detail. Graham , if you are wondering how to stick Ron's little assembly onto the plastic , there are a few options . 1) rough the plastic up in the contact area then simply epoxy wood as Ron did . 2) contact glue a pad of postcard onto the cowl , which can then assumed to be "wood" as far as most wood glues are concerned . I actually brown papered my original plastic cowl and it was so tough that it never developed any splits or chips over continuous flying for six years ! 2 Quote Link to comment Share on other sites More sharing options...
martin collins 1 Posted February 10 Author Share Posted February 10 Holy old thread alert Batman, did you ever finish your LA7 off Graham? I have two or three unfinished airframes and was about to dig another kit out to start but for a change have shown a bit of restraint and decided to finish off the part finished ones first. I spent this afternoon shaving wood off one half of the LA7 wing, hopefully i can get the other half sorted this coming week so i can join them together, now i have picked it up again i am determined to see it through to the finish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.