Simon Clark Posted November 14, 2021 Share Posted November 14, 2021 On 10/11/2021 at 23:04, jrman said: I think it was developed by JR and adopted by Spektrum when JR/Spektrum were working together. All current JR Tx's have model match. Futaba has recently updated the software to include model match which works with most of their receivers (all of mine). There is a software download available for most of the newer transmitters but it does mean that you will need to rebind everything. I moved from JR to Futaba (T18SZ) about three years ago and I love the increased functionality but I was a bit worried about the lack of model match so I was very pleased when this was introduced recently. Quote Link to comment Share on other sites More sharing options...
Adrian Smith 1 Posted December 1, 2021 Author Share Posted December 1, 2021 Note to GrumpyGnome - I have started my Pilot RC Slick build here :- https://www.modelflying.co.uk/forums/index.php?/topic/49224-pilot-rc-slick-67-first-look-and-build/&tab=comments#comment-904780 1 Quote Link to comment Share on other sites More sharing options...
Andy Stephenson Posted December 14, 2021 Share Posted December 14, 2021 (edited) Can't find a better place to post this... Air Accidents Investigations Branch report after police drone 'lost' near Henley https://www.oxfordmail.co.uk/news/19778118.air-accidents-investigations-branch-report-police-drone-lost-near-henley/ Edited December 14, 2021 by Andy Stephenson Quote Link to comment Share on other sites More sharing options...
Peter Jenkins Posted December 14, 2021 Share Posted December 14, 2021 Just goes to show how important maintaining currency is. I know when I got back to flying after the first lockdown I was very careful to go through all the check lists methodically before committing to fly. I'd had a 3 month break from flying. I usually fly once or twice a week so I felt very rusty. Turned out fine as my brain kicked in pretty quickly. Quote Link to comment Share on other sites More sharing options...
Don Fry Posted December 14, 2021 Share Posted December 14, 2021 I note from the instructions for this machine, the manufacturer reckons. Fit battery. Unfold the bits. Switch on, check function. Off. Less than a minute. This bloke, a couple of hours experience, at night, in fog. Might even believe the instructions. What could go wrong? Quote Link to comment Share on other sites More sharing options...
Peter Jenkins Posted December 14, 2021 Share Posted December 14, 2021 This is the problem with non-aerospace trained operators. Quote Link to comment Share on other sites More sharing options...
Don Fry Posted December 15, 2021 Share Posted December 15, 2021 Nothing to do with aerospace training. Look through a boatload of full size crashes. A idiot, managed by cretins, who with a bit of training, probably by a fool, will always result in a trained idiot, supervised by an empowered cretin. With an ego that goes with their newly acquired expertise. Quote Link to comment Share on other sites More sharing options...
Paul De Tourtoulon Posted December 15, 2021 Share Posted December 15, 2021 Obviously he didn't wait long enough for a proper GPS signal lock or / and flicked the wrong switch,,, It happened to me in my early days building my own drones which I test flew at Montpellier, got back home 100 klms away and took off when I started loosing sight of it so I switched on the RTH only to see it fly in the direction of Montpellier,,, So before take off wait till it has a proper GPS lock !. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted December 15, 2021 Share Posted December 15, 2021 (edited) 47 minutes ago, Paul De Tourtoulon said: Obviously he didn't wait long enough for a proper GPS signal lock or / and flicked the wrong switch,,, It happened to me in my early days building my own drones which I test flew at Montpellier, got back home 100 klms away and took off when I started loosing sight of it so I switched on the RTH only to see it fly in the direction of Montpellier,,, So before take off wait till it has a proper GPS lock !. Have had experienced this one Paul A friend at the strip powered up his new GPS equipped quad for a test. this promptly took off, then flew off. On returning home, the quad had landed, undamaged, 3 miles away from the patch, in his back garden. Following this, we had a club meeting to discuss how to avoid this scary event occurring ever again. Edited December 15, 2021 by Denis Watkins Quote Link to comment Share on other sites More sharing options...
Peter Jenkins Posted December 15, 2021 Share Posted December 15, 2021 I think it's called RTM. Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted December 15, 2021 Share Posted December 15, 2021 I'd recommend making use of voice prompts - my transmitter calls the name of my model when selected, as well as position of all key switches. For anything unique, just use something like Audacity to record a custom voice prompt.... "check GPS" seems appropriate. Or use the checklist feature if using OpenTX - no signal is transmitted until the checklist is dismissed. I use the checklist if I have been tinkering, or need to check something specific. All helps prevent accidents. Quote Link to comment Share on other sites More sharing options...
Paul De Tourtoulon Posted December 15, 2021 Share Posted December 15, 2021 1 hour ago, Peter Jenkins said: I think it's called RTM. RTH, return to home. Quote Link to comment Share on other sites More sharing options...
Peter Jenkins Posted December 15, 2021 Share Posted December 15, 2021 RTM = Read the Manual Quote Link to comment Share on other sites More sharing options...
Nick Cripps Posted December 15, 2021 Share Posted December 15, 2021 I think you missed a letter, Peter... 1 Quote Link to comment Share on other sites More sharing options...
Ron Gray Posted December 15, 2021 Share Posted December 15, 2021 I use iNav on my flight controllers, by default the model will not arm until the gps has locked onto sats. Sure you can override this by reprogramming but you have to physically type the command line to do this. RTH locates the position the model was armed. Quote Link to comment Share on other sites More sharing options...
Martin Harris - Moderator Posted December 15, 2021 Share Posted December 15, 2021 59 minutes ago, Nick Cripps said: I think you missed a letter, Peter... With my moderator’s hat on, I’m quite glad that he did. Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted December 15, 2021 Share Posted December 15, 2021 2 hours ago, Nick Cripps said: I think you missed a letter, Peter... Would that by any chance be "E" for ......... Quote Link to comment Share on other sites More sharing options...
GrumpyGnome Posted December 15, 2021 Share Posted December 15, 2021 4 hours ago, Ron Gray said: I use iNav on my flight controllers, by default the model will not arm until the gps has locked onto sats. Sure you can override this by reprogramming but you have to physically type the command line to do this. RTH locates the position the model was armed. Very sensible. I only have one quadcopter and although it has RTH, it's not mandatory to get a GPS lock. It's quite old and gets used very very rarely. Probably going to pass it on .... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.